some things are happening
- sunmachine
- Posts: 480
- Joined: Mon Mar 01, 2010 12:37 am
Re: some things are happening
Here are the Downloads:
SCOPE V7: http://scope.zone/index.php?id=1978&lg= ... scope_v7.0
SDK V7: http://scope.zone/index.php?id=1978&lg= ... e_sdk_v7.0
SCOPE V7: http://scope.zone/index.php?id=1978&lg= ... scope_v7.0
SDK V7: http://scope.zone/index.php?id=1978&lg= ... e_sdk_v7.0
Re: some things are happening
purchased here as well. with the madness of SDK. hope to use it just a little bit!
Re: some things are happening
Thanks for the download links guys! Appreciated. I'm on it!
As far as installation is concerned, does V5.1 have to be removed before I can install V7? I think the answer is yes but I just wanted to confirm. Thanks!
As far as installation is concerned, does V5.1 have to be removed before I can install V7? I think the answer is yes but I just wanted to confirm. Thanks!
Re: some things are happening
This is not yet available, but a teaser if you own the prodyssey it has a v7 coming soon too, more quirky mods on this one.
- unison
- 3 additional filter types - minimax, pro1, pro5 (+ the original prodyssey)
- mild distortion
- second filter now switchable between hp/lp
- drone mode
- 4 fx slots
- unison
- 3 additional filter types - minimax, pro1, pro5 (+ the original prodyssey)
- mild distortion
- second filter now switchable between hp/lp
- drone mode
- 4 fx slots
Scope, Android, Web, PC Plugins and Sounds:
http://www.oceanswift.net
Music
https://faxinadu.bandcamp.com/
http://www.oceanswift.net
Music
https://faxinadu.bandcamp.com/
Re: some things are happening
you can rename the 5.1 folder so its not called scope pci (rename it to something like scope5)krizrox wrote:Thanks for the download links guys! Appreciated. I'm on it!
As far as installation is concerned, does V5.1 have to be removed before I can install V7? I think the answer is yes but I just wanted to confirm. Thanks!
Scope, Android, Web, PC Plugins and Sounds:
http://www.oceanswift.net
Music
https://faxinadu.bandcamp.com/
http://www.oceanswift.net
Music
https://faxinadu.bandcamp.com/
Re: some things are happening
Noted thanks!faxinadu wrote:you can rename the 5.1 folder so its not called scope pci (rename it to something like scope5)krizrox wrote:Thanks for the download links guys! Appreciated. I'm on it!
As far as installation is concerned, does V5.1 have to be removed before I can install V7? I think the answer is yes but I just wanted to confirm. Thanks!
Re: some things are happening
catscratch wrote:It's well documented on here so can't see why it wouldn't be included... been a thorn in my side for years now.don't know about that particular one
well, this site is not SonicCore.
feel free to let Holger know.
there is only so much that a person can do at a time. the biggest hurdle is overcome. it'sd not your problem, but Scope 6 almost ruined everything. it was abandoned and everything was left in a big mess when the main programmer ran into a brick wallk and quit. it has taken all this time to get back to order.
as i have said before, i use ccs in the Scope mixers all the time and my settings get saved with the project reliably. unfortunately, the thing you are trying to do SHOULD work , but doesn't. still, you are the only one who has consistently complained, and only here and on XITEd. please write Holger and explain the exact actions that do not work. if he can fix it, he will.
Re: some things are happening
Scope 7 can install into the v5.1 folder. it will overwrite the system files, but it will leave the personal user data.faxinadu wrote:you can rename the 5.1 folder so its not called scope pci (rename it to something like scope5)krizrox wrote:Thanks for the download links guys! Appreciated. I'm on it!
As far as installation is concerned, does V5.1 have to be removed before I can install V7? I think the answer is yes but I just wanted to confirm. Thanks!
of course, you should back up your Scope folder for safety's sake.
Re: some things are happening
I installed the V7 driver and my v5.1 installation stopped working. Not sure I'f I can easily go back again.krizrox wrote:Thanks for the download links guys! Appreciated. I'm on it!
As far as installation is concerned, does V5.1 have to be removed before I can install V7? I think the answer is yes but I just wanted to confirm. Thanks!
Re: some things are happening
petal wrote:I installed the V7 driver and my v5.1 installation stopped working. Not sure I'f I can easily go back again.krizrox wrote:Thanks for the download links guys! Appreciated. I'm on it!
As far as installation is concerned, does V5.1 have to be removed before I can install V7? I think the answer is yes but I just wanted to confirm. Thanks!
guys it was mentioned above - YOU CAN NOT USE BOTH. once you install 7 driver, 5.1 won't work.
Scope, Android, Web, PC Plugins and Sounds:
http://www.oceanswift.net
Music
https://faxinadu.bandcamp.com/
http://www.oceanswift.net
Music
https://faxinadu.bandcamp.com/
Re: some things are happening
petal wrote:I'd appreciate that. If I can't run both my PCI installation and my XITE installation simultaneously, I'll have to rethink my whole setup.faxinadu wrote:
i'm not sure about the answers to those, i can try to find out. note: info i give here is my own, not official sonic core info or position.
that should not change with Scope 7. you can run PCI and XITE like always, afaik.
Re: some things are happening
petal wrote:I installed the V7 driver and my v5.1 installation stopped working. Not sure I'f I can easily go back again.krizrox wrote:Thanks for the download links guys! Appreciated. I'm on it!
As far as installation is concerned, does V5.1 have to be removed before I can install V7? I think the answer is yes but I just wanted to confirm. Thanks!
that's right, unless you manually choose to use the older driver.
Re: some things are happening
petal wrote:I installed the V7 driver and my v5.1 installation stopped working. Not sure I'f I can easily go back again.krizrox wrote:Thanks for the download links guys! Appreciated. I'm on it!
As far as installation is concerned, does V5.1 have to be removed before I can install V7? I think the answer is yes but I just wanted to confirm. Thanks!
Just change the driver manually (reinstalling the pevious driver).
Re: some things are happening
I'm not sure what exactly catscratch is trying to do, but there is a problem/bug in the cc system on Scope, and as Atom informed me after many hours of trying to figure out what was going on, there has been a bug here for many many years. It's a very old and known bug from back in the creamware days:garyb wrote:as i have said before, i use ccs in the Scope mixers all the time and my settings get saved with the project reliably. unfortunately, the thing you are trying to do SHOULD work , but doesn't. still, you are the only one who has consistently complained, and only here and on XITEd. please write Holger and explain the exact actions that do not work. if he can fix it, he will.catscratch wrote:It's well documented on here so can't see why it wouldn't be included... been a thorn in my side for years now.don't know about that particular one
http://forums.scopeusers.com/viewtopic. ... lit=cc+bug
Last edited by petal on Fri Dec 01, 2017 10:49 am, edited 1 time in total.
Re: some things are happening
Great to hear - thanks!garyb wrote: that should not change with Scope 7. you can run PCI and XITE like always, afaik.
Re: some things are happening
OK - great!garyb wrote:petal wrote:I installed the V7 driver and my v5.1 installation stopped working. Not sure I'f I can easily go back again.krizrox wrote:Thanks for the download links guys! Appreciated. I'm on it!
As far as installation is concerned, does V5.1 have to be removed before I can install V7? I think the answer is yes but I just wanted to confirm. Thanks!
that's right, unless you manually choose to use the older driver.
-
- Posts: 1175
- Joined: Sun Apr 04, 2004 4:00 pm
- Location: Brighton England
- Contact:
Re: some things are happening
Are samplers working in 64bit.
Looks like a few seq issues are sorted with mention to sb404 and modular module seq1 (for Xite)
Looks like a few seq issues are sorted with mention to sb404 and modular module seq1 (for Xite)
- next to nothing
- Posts: 2521
- Joined: Mon Jul 29, 2002 4:00 pm
- Location: Bergen, Norway
Re: some things are happening
I saw Faxi say earlier in this thread: "sts doesn't work yet in 64bit, but other samples including some of the free 3rd party ones work."
I hope the "yet" bit is meant in an optimistic tone
Anyways, great seeing a new release
I hope the "yet" bit is meant in an optimistic tone
Anyways, great seeing a new release
A positive attitude may not solve all your problems, but it will annoy enough people to make it worth the effort.
Re: some things are happening
coolJoPo wrote:I just send the news to french Audiofanzine to ask them to publish a news in their newsletter because I hope they don't have time to do that at S|C ! But I also told them that even if "soon", at S|C, can mean "years or decade", this time, they are using the same "soon" meaning !
If all "Z" users would ask to his favorit audio stuff media or forum to spread the good word to the world ! That would be nice !