Clock 2 Click

Scope device files created using the Scope SDK

Moderators: valis, garyb

voidar
Posts: 1264
Joined: Sun Aug 18, 2002 4:00 pm
Location: Norway

Post by voidar »

Yes, but if you want to ditch the VRCs altogether, could not MTC be generated by Clk?

Because you could easily record Clk0 from VRC to any VDAT track and then remove the VRC from the project.
C2C will tick perfectly to the recorded track.

C2C already generates MIDI Clock, but what about MTC?
voidar
Posts: 1264
Joined: Sun Aug 18, 2002 4:00 pm
Location: Norway

Post by voidar »

Clock 2 Click can also be driven by the MTCtoClk module.

I wonder what the VRC+VDAT/Sync plate looks for in addition to MTC.
YiannisK
Posts: 225
Joined: Wed Dec 03, 2003 4:00 pm
Location: Canada
Contact:

Can't load the wav files

Post by YiannisK »

Hi there I'm trying to use c2c and everything works great with the exeption that I can't load the beat or bar wav.s

Tried to drag and drop the wav.s and I get "cannot load beat.wav etc."

I'd also like to add that I can't load any wav. files in Modular II or III.
All my STS samplers work great but I have this problem.

Any Ideas?

Thanks
User avatar
wayne
Posts: 2377
Joined: Sun Dec 23, 2001 4:00 pm
Location: Australia

Post by wayne »

Beat and Bar wavs need to be in your C: directory.
voidar
Posts: 1264
Joined: Sun Aug 18, 2002 4:00 pm
Location: Norway

Post by voidar »

I unfortunately managed to have a I: for my system on last format. It would be much better if C2C looked for the files in the same directory as they won't show up in the device-menues.

Anyway, drag-and-drop works ony my system. Try the filebrowser.
gainman
Posts: 62
Joined: Sun Aug 20, 2006 4:00 pm

Post by gainman »

The device doesn't seem to be available in adern's site.

Could someone post it here?
User avatar
wayne
Posts: 2377
Joined: Sun Dec 23, 2001 4:00 pm
Location: Australia

Post by wayne »

here ya go.
Attachments
Clock 2 Click.zip
(164.2 KiB) Downloaded 434 times
gainman
Posts: 62
Joined: Sun Aug 20, 2006 4:00 pm

Post by gainman »

Many thanks!
pistoguitar
Posts: 66
Joined: Sat Dec 30, 2006 3:02 am
Location: Italy
Contact:

Post by pistoguitar »

Thanks Wayne! I really needed that! BTW link on adern's page seems to be broken.
"Una risata vi seppellirà..."
User avatar
Mary Mungo
Posts: 99
Joined: Sat Feb 03, 2007 9:16 am
Location: Rural Frivolity

Post by Mary Mungo »

You'll find that the Adern team are doing a lot of site modifications and restructuring owing to the imminent release of Flexor 3 :D
I am led to believe that you can expect all to be rectified and working again shortly and better than before :P
pistoguitar
Posts: 66
Joined: Sat Dec 30, 2006 3:02 am
Location: Italy
Contact:

Post by pistoguitar »

Wonderful! :)
I'm just about buying flexor, coz' I've just realised the potential of CW's Modular system, and this buying seemed to me the logical consequence.
One little question, am I expected to buy flexor 1 on CW's webshop and then download all the packages and updates from adern website, or I can just buy and download ver 3?

PS is this the right place for posing such a question?
"Una risata vi seppellirà..."
User avatar
faxinadu
Posts: 1646
Joined: Wed Nov 01, 2006 3:12 am
Location: israel
Contact:

Post by faxinadu »

hey pisto, wait a few more days for adern to release flexor3 and then all info will be available... really soon now ;)
Scope, Android, Web, PC Plugins and Sounds:
http://www.oceanswift.net
Music
https://faxinadu.bandcamp.com/
tomylee
Posts: 305
Joined: Fri Oct 27, 2006 9:39 pm
Location: Berlin

Post by tomylee »

ahhh, great again...lost time and wound up posting here again instead of working...I had midi clock stability problems, and wondered what alternative clock I could use - thought about a ramp track in my sequencer, but that would have been a sample-fiddling - wavelab-creating time expense...then I found this device, and it states it could sync flexor modular etc - then the readme tells me there is even a ramp output, and I´m already convinced this is it - I set all up, and then - crap, how does this module know when I start my sequencer? Midi clock input? crap, there is no ramp output at all! The two files beat, and bar (what are these??) load correctly, the readme states nothing more on this topic, there is no manual and no notes here - so how do you gurus here work with this indeed anticipating cool new device and clock your sequencer with it, and have everything tight?!

I guess I´m the voice of the noob on this topic, but darn, not everybody wants to spend half day to scrawl through forums just because there is only a spartanic readme included

cheers although!

Tom
voidar
Posts: 1264
Joined: Sun Aug 18, 2002 4:00 pm
Location: Norway

Post by voidar »

You can slave C2C to your sequencer via the MTCtoClk module, if your sequencer outputs MTC.

Problem however is that C2C just keeps ticking when the sequncer has stopped. It will start at the correct bar though on play.
This is a bug I presume and I would like to get it fixed.

The wavs are for the metronome. Hook-up Clic to some monitoring source.

You could always record a bar/full ramp in your sequencer, then loop that. This can also be scaled (repitched) to change tempos.
You can also record the bar output.

In a way it would be cool to have a VST-plugin which does what C2C does. It would just get the info directly from the host, even time sig (which C2C won't do now). and then just output a ramp and bar via two software-outs.

Another idea would be an Absolute Val VST which you would just VST-automate as you wish in the host. Of course, it would need to be sample-accurate.

Anyone up for the task?
User avatar
Janni
Posts: 389
Joined: Thu Dec 30, 2004 4:00 pm
Location: Cologne - Germany

Post by Janni »

That's a VERY GOOD idea!!!
Cheers,
Jan
:D :D :D
-/-
Post Reply