Clock 2 Click

voidar · Post by **voidar** » Wed Oct 11, 2006 10:12 am

Yes, but if you want to ditch the VRCs altogether, could not MTC be generated by Clk?

Because you could easily record Clk0 from VRC to any VDAT track and then remove the VRC from the project.
C2C will tick perfectly to the recorded track.

C2C already generates MIDI Clock, but what about MTC?

voidar · Post by **voidar** » Tue Oct 17, 2006 10:35 am

Clock 2 Click can also be driven by the MTCtoClk module.

I wonder what the VRC+VDAT/Sync plate looks for in addition to MTC.

YiannisK · Post by **YiannisK** » Mon Oct 23, 2006 7:32 pm

Hi there I'm trying to use c2c and everything works great with the exeption that I can't load the beat or bar wav.s

Tried to drag and drop the wav.s and I get "cannot load beat.wav etc."

I'd also like to add that I can't load any wav. files in Modular II or III.
All my STS samplers work great but I have this problem.

Any Ideas?

Thanks

wayne · Post by **wayne** » Mon Oct 23, 2006 8:56 pm

Beat and Bar wavs need to be in your C: directory.

voidar · Post by **voidar** » Tue Oct 24, 2006 4:23 am

I unfortunately managed to have a I: for my system on last format. It would be much better if C2C looked for the files in the same directory as they won't show up in the device-menues.

Anyway, drag-and-drop works ony my system. Try the filebrowser.

gainman · Post by **gainman** » Sat Dec 02, 2006 9:57 am

The device doesn't seem to be available in adern's site.

Could someone post it here?

wayne · Post by **wayne** » Sat Dec 02, 2006 8:10 pm

here ya go.

gainman · Post by **gainman** » Sun Dec 03, 2006 10:37 pm

Many thanks!

pistoguitar · Post by **pistoguitar** » Wed Jun 13, 2007 2:57 am

Thanks Wayne! I really needed that! BTW link on adern's page seems to be broken.

Mary Mungo · Post by **Mary Mungo** » Wed Jun 13, 2007 3:54 am

You'll find that the Adern team are doing a lot of site modifications and restructuring owing to the imminent release of Flexor 3

I am led to believe that you can expect all to be rectified and working again shortly and better than before

pistoguitar · Post by **pistoguitar** » Fri Jun 15, 2007 9:08 am

Wonderful!

I'm just about buying flexor, coz' I've just realised the potential of CW's Modular system, and this buying seemed to me the logical consequence.
One little question, am I expected to buy flexor 1 on CW's webshop and then download all the packages and updates from adern website, or I can just buy and download ver 3?

PS is this the right place for posing such a question?

faxinadu · Post by **faxinadu** » Wed Jun 20, 2007 4:49 am

hey pisto, wait a few more days for adern to release flexor3 and then all info will be available... really soon now

tomylee · Post by **tomylee** » Mon Jun 25, 2007 5:59 am

ahhh, great again...lost time and wound up posting here again instead of working...I had midi clock stability problems, and wondered what alternative clock I could use - thought about a ramp track in my sequencer, but that would have been a sample-fiddling - wavelab-creating time expense...then I found this device, and it states it could sync flexor modular etc - then the readme tells me there is even a ramp output, and I´m already convinced this is it - I set all up, and then - crap, how does this module know when I start my sequencer? Midi clock input? crap, there is no ramp output at all! The two files beat, and bar (what are these??) load correctly, the readme states nothing more on this topic, there is no manual and no notes here - so how do you gurus here work with this indeed anticipating cool new device and clock your sequencer with it, and have everything tight?!

I guess I´m the voice of the noob on this topic, but darn, not everybody wants to spend half day to scrawl through forums just because there is only a spartanic readme included

cheers although!

Tom

voidar · Post by **voidar** » Sat Oct 13, 2007 8:33 am

You can slave C2C to your sequencer via the MTCtoClk module, if your sequencer outputs MTC.

Problem however is that C2C just keeps ticking when the sequncer has stopped. It will start at the correct bar though on play.
This is a bug I presume and I would like to get it fixed.

The wavs are for the metronome. Hook-up Clic to some monitoring source.

You could always record a bar/full ramp in your sequencer, then loop that. This can also be scaled (repitched) to change tempos.
You can also record the bar output.

In a way it would be cool to have a VST-plugin which does what C2C does. It would just get the info directly from the host, even time sig (which C2C won't do now). and then just output a ramp and bar via two software-outs.

Another idea would be an Absolute Val VST which you would just VST-automate as you wish in the host. Of course, it would need to be sample-accurate.

Anyone up for the task?

Janni · Post by **Janni** » Thu Oct 18, 2007 10:57 am

That's a VERY GOOD idea!!!
Cheers,
Jan

PlanetZ forums - scopeusers.com

Clock 2 Click

Can't load the wav files