I need to know which is the best Bios-settings for Pulsar
and what IRQ is reccomended.
Thanx for your help
Bios Settings (by jaco)
-
Guest
Subject: IRQ
IRQ settings could be different on different computers. In Windows, go to Start>Programs>Accessories>Sys Tools>System Info>Hardware>IRQ settings. You want to determine which PCI slots, usually 1-5, are assigned to IRQ numbers. Find a slot that is unassigned or used for sound. A good troublshooting meathod is to remove all non-essential PCI cards, such as modem, Ethernet, other Sound Cards and start up Pulsar. If everything works better, add them back one at a time until the problem comes back.
Chuck
IRQ settings could be different on different computers. In Windows, go to Start>Programs>Accessories>Sys Tools>System Info>Hardware>IRQ settings. You want to determine which PCI slots, usually 1-5, are assigned to IRQ numbers. Find a slot that is unassigned or used for sound. A good troublshooting meathod is to remove all non-essential PCI cards, such as modem, Ethernet, other Sound Cards and start up Pulsar. If everything works better, add them back one at a time until the problem comes back.
Chuck