Creamware card on a beige G3 mac?

A place to talk about whatever Scope music/gear related stuff you want.

Moderators: valis, garyb

Post Reply
amundsen
Posts: 10
Joined: Sun Mar 10, 2002 4:00 pm

Post by amundsen »

I plan to install a PowerSampler card on a beige G3/333 MHz Macintosh.

I would like to know if this kind of configuration will offer a good reliability and enough voices, especially if I record the sound in Logic Audio.

I'm also interested to know about successful G3 configurations with Luna (I/II) or Pulsar cards.

Thank you for helping.

Best,

Amundsen
borg
Posts: 1517
Joined: Tue Oct 23, 2001 4:00 pm
Location: antwerp, belgium

Post by borg »

be carefull! i remember reading something about B/W G3 being minimum specifications, but i can't remember wether it was for pulsar or digi001. it was in a computermusic soundcard special about two years ago.
i have B/W G3 450Mhz with pulsarII and it works fine.
inform yourself properly before buying.

_________________
andy
maybe a bit lazy but willing to learn

<font size=-1>[ This Message was edited by: borg on 2002-03-11 07:20 ]</font>
amundsen
Posts: 10
Joined: Sun Mar 10, 2002 4:00 pm

Post by amundsen »

I think it was for the Digi001. One of my friends tried to installit into a beige G3 but nver managed it to work. So he had to change for a G4.

Have you used any of the STS samplers on this card? How did it work?

Best,

Amundsen
samplaire
Posts: 2464
Joined: Tue Jun 05, 2001 4:00 pm
Location: Warsaw to Szczecin, Poland
Contact:

Post by samplaire »

Hi, I tried my Luna card on my previous comoputer (G3/266) and it worked quite fine (no visible differences between my current comp G4/400). The only disadvantage of the beige G3 for CW cards use is lack of AGP (video may conflict with Luna data stream). Luna/Pulsar GUI is very demandin: my 16MB ATI rage fury card works very slow especially when dragging windows and it was a nightmare on the G3. I'm not sure but AirPollo tried his Pulsar on G4/733 or so with rather similar effects (slow graphic, Geforce card)

If you must use the G3/333, install Luna soft on 8.6 OS - it's the most stabile system available for you/luna (forget 9.x, they are not so stabile but I chave no choice on my G4). OMS 2.3.7 is a must and get rid of Multiproccessing folder found in Extensions folder of System Folder (remove it manualy because the Extensions Manager don't see it)
jupiter8
Posts: 448
Joined: Wed Mar 28, 2001 4:00 pm
Location: Sweden lives in Norway

Post by jupiter8 »

Did'nt the 333 mHz model come with a SCSI UW2 card?
That is on the PCI bus as well, so you should probably loose that card.
Creamware cards needs lot's of PCI bandwitdh.
Post Reply