Missing ADAT inputs .... XTC mode ...
Missing ADAT inputs .... XTC mode ...
Does cubase 5 (32), has some I/O limitation up to 32 I/Os, does XTC has IO limitation, or i may have missed something ?
Creamware Scope 5.1 (Scope Power Pulsar 1.01|3 x Pulsar II|Pulsar I|Syncplate), scope abuser since 2004.
Asus Z87-K C2|Intel Haswell Core i7-4770|Kingston KHX1600C9D3K2/8GX - 2 x 4 Gb Ram (1600 MHz)
13 MV @ Masterverb Test
Asus Z87-K C2|Intel Haswell Core i7-4770|Kingston KHX1600C9D3K2/8GX - 2 x 4 Gb Ram (1600 MHz)
13 MV @ Masterverb Test
Re: Missing ADAT inputs .... XTC mode ...
got my answer ... thanks to ASIO2 Dest-64 module on my scope project !
Asio has a 32 I/O stereo limitation ....
Asio has a 32 I/O stereo limitation ....
Creamware Scope 5.1 (Scope Power Pulsar 1.01|3 x Pulsar II|Pulsar I|Syncplate), scope abuser since 2004.
Asus Z87-K C2|Intel Haswell Core i7-4770|Kingston KHX1600C9D3K2/8GX - 2 x 4 Gb Ram (1600 MHz)
13 MV @ Masterverb Test
Asus Z87-K C2|Intel Haswell Core i7-4770|Kingston KHX1600C9D3K2/8GX - 2 x 4 Gb Ram (1600 MHz)
13 MV @ Masterverb Test
Re: Missing ADAT inputs .... XTC mode ...
wrong ... i don't understand where i miss something ...
Creamware Scope 5.1 (Scope Power Pulsar 1.01|3 x Pulsar II|Pulsar I|Syncplate), scope abuser since 2004.
Asus Z87-K C2|Intel Haswell Core i7-4770|Kingston KHX1600C9D3K2/8GX - 2 x 4 Gb Ram (1600 MHz)
13 MV @ Masterverb Test
Asus Z87-K C2|Intel Haswell Core i7-4770|Kingston KHX1600C9D3K2/8GX - 2 x 4 Gb Ram (1600 MHz)
13 MV @ Masterverb Test
Re: Missing ADAT inputs .... XTC mode ...
anything happening inside Scope is a complete mystery to windows.
all a windows app can see is the ASIO channels and the sequnecer midi ports. if you want to connect to the ADAT i/o, you must make this possible in the xtcproject.pro
all a windows app can see is the ASIO channels and the sequnecer midi ports. if you want to connect to the ADAT i/o, you must make this possible in the xtcproject.pro
Re: Missing ADAT inputs .... XTC mode ...
Thanks, i finally found this project, edited to fit what i need.
Original project has 32 Mono I/O in asio module, is that the XTC limit ?
Is there any way to mix each input to the global cubase's output without creating an audio track each time (in "preview) mode ?
Original project has 32 Mono I/O in asio module, is that the XTC limit ?
Is there any way to mix each input to the global cubase's output without creating an audio track each time (in "preview) mode ?
Creamware Scope 5.1 (Scope Power Pulsar 1.01|3 x Pulsar II|Pulsar I|Syncplate), scope abuser since 2004.
Asus Z87-K C2|Intel Haswell Core i7-4770|Kingston KHX1600C9D3K2/8GX - 2 x 4 Gb Ram (1600 MHz)
13 MV @ Masterverb Test
Asus Z87-K C2|Intel Haswell Core i7-4770|Kingston KHX1600C9D3K2/8GX - 2 x 4 Gb Ram (1600 MHz)
13 MV @ Masterverb Test
Re: Missing ADAT inputs .... XTC mode ...
it would be easier and quicker to just use Scope mode....
no, you should be able to use 32 stereo ASIO channels, as long as the computer can handle the bandwidth.
i think you need an audio track....
no, you should be able to use 32 stereo ASIO channels, as long as the computer can handle the bandwidth.
i think you need an audio track....