So finally my trusty old 6dsp broke down. Somehow the adat connections give me nothing but digital noises and whatever card i put in the same computer and connect with the stdm cable, has the same noise on the adat inputs. Must be some digital sync error going from Ole board to the other. The card is the only one i have 5.0 Keys for so im thinking about selling out and getting the xite d. Its alot of money for me. I dont really need All the power of my card but i really like the thought of the pcie card connector and its an investment into the future way of connections(i have had alot of problems with pci in the past)
I Will be using it mainly in xtc. Anybody using their xite in xtc mode?
Does it still have All the same bugs as the pci version?
Ill be running win xp 32bit.
I really have mixed feelings about this.. Maybe i should just get a rme raydat card instead and just use scope for fx.
i'll be able to use a scope card in standalone xtc mode along with another card, right?
Thanks alot!
Xite xtc etc
-
the19thbear
- Posts: 1499
- Joined: Thu Feb 20, 2003 4:00 pm
- Location: Denmark
- Contact:
Re: Xite xtc etc
Or you could send it in for repair.And if its not repairable transfer the keys to a working one.P2 cards show up for peanut money used these days.
-
the19thbear
- Posts: 1499
- Joined: Thu Feb 20, 2003 4:00 pm
- Location: Denmark
- Contact:
Re: Xite xtc etc
FIXED IT! 
turned out it was a bad IO plate and some of my adat cables were bad... or didnt have the right size/shape top fit perfectly into adat ins/outs.
turned out it was a bad IO plate and some of my adat cables were bad... or didnt have the right size/shape top fit perfectly into adat ins/outs.