PlanetZ forums - scopeusers.com

Hello.

I use Pulsar 1 and Pulsar 2 with S/TDM cable, and they are connected to A16 ultra and various a/d d/a converters.

I want to add sync plate.

Do I need two sync plates connecting each card?

or is just one enough?

one is plenty.

garyb wrote:one is plenty.

thanks garyb.

If you need a syncplate im selling one.
Send me a PM.

Just curious - is there any advantage to running a dedicated sync to Scope if you're using the Z-Link option from A16? Or is that mostly for ADAT transmission?

if you have a number of different digital devices that alll must be clocked together, bnc wordclock is the way to go. if it's just an AD/DA like the A16 and Scope card(s), then ADAT or better, Z-Link is perfectly fine.

krizrox wrote:Just curious - is there any advantage to running a dedicated sync to Scope if you're using the Z-Link option from A16? Or is that mostly for ADAT transmission?

How about it?

Would it work with Steinbergs' VST System link or are they fundamentally incompatible, eg "scope mode"?

what are you talking about? the syncplate is about digital sync between hardware.

muswell wrote:

krizrox wrote:Just curious - is there any advantage to running a dedicated sync to Scope if you're using the Z-Link option from A16? Or is that mostly for ADAT transmission?

How about it?

Would it work with Steinbergs' VST System link or are they fundamentally incompatible, eg "scope mode"?

????????????????????????????????????????????????????????