adding a 1st generation board ?
adding a 1st generation board ?
I have a 21 dsp system now (2 2d gen boards) and a friend of mine have given me a pulsar1 as he doesn't play music anymore. My question is simple : adding 4 dsp may add power so it may be worth it Buuuuuuuuut.... is it a good idea as it is a 1st gen board ? As i often use P100 and A100 for example.... I know a whole system made of 1st gen would not be a good idea. What happens when only one board is 1st gen ? Thanks.
Re: adding a 1st generation board ?
Hi Jo,
As long as it is not the host, it just add dsp power (don't come into play with the PCI communication).
cheers
As long as it is not the host, it just add dsp power (don't come into play with the PCI communication).
cheers
Re: adding a 1st generation board ?
great ... I was not sure about it ; thanks for this fast reply ! I will add it this afternoon ...
Jo
Jo
Re: adding a 1st generation board ?
sorry to disagree, but it will decrease your current PCI bus performance for about 30%
at least that's what I read from the masterverb tests with mixed systems
cheers, Tom
at least that's what I read from the masterverb tests with mixed systems
cheers, Tom
Re: adding a 1st generation board ?

that would prevent me from adding this board. Even a luna would do a better job so ...
- siriusbliss
- Posts: 3118
- Joined: Fri Apr 06, 2001 4:00 pm
- Location: Cupertino, California US
- Contact:
Re: adding a 1st generation board ?
still have my orignal P1 and older SRB in my system - not as the host board though - and it hasn't slowed bus speed to any large degree on my system.
It's great to have all the extra I/O.
Greg
It's great to have all the extra I/O.
Greg
Xite rig - ADK laptop - i7 975 3.33 GHz Quad w/HT 8meg cache /MDR3-4G/1066SODIMM / VD-GGTX280M nVidia GeForce GTX 280M w/1GB DDR3
Re: adding a 1st generation board ?
need one?bill3107 wrote:that would prevent me from adding this board. Even a luna would do a better job so ...

--
I'm sorry, but my karma just ran over your dogma.
I'm sorry, but my karma just ran over your dogma.
Re: adding a 1st generation board ?
Just try it out.I have no problems running a pulsar 2 and 2 pulsar1.I reach full dsp load without problems on a dell p4 2.8 with ht on.
Including flexor mods and reverb/delay etc.Atleast for me pci bus overload is a non issue,it never happens in real producing situations...knocks on wooooooood.
I get 12 Masterverbs until overflow.
Including flexor mods and reverb/delay etc.Atleast for me pci bus overload is a non issue,it never happens in real producing situations...knocks on wooooooood.
I get 12 Masterverbs until overflow.
Re: adding a 1st generation board ?
you'd probably get 16-18 with only 2nd generation boards, but then you'd lack the 8 DSPs of the Pulsar Ones and wouldn't have enough processing power to enjoy them... 
of course there are no problems with Masterverbs, but Jo has the A100 (probably wants to use > 1 instance) and that thing eats PCI bus cycles for breakfast - you have no idea of it's hunger

I guess a single instance is about 5 Masterverbs...
it's an exceptional plugin, you just can't leave it out once you know it
cheers, Tom

of course there are no problems with Masterverbs, but Jo has the A100 (probably wants to use > 1 instance) and that thing eats PCI bus cycles for breakfast - you have no idea of it's hunger


I guess a single instance is about 5 Masterverbs...
it's an exceptional plugin, you just can't leave it out once you know it

cheers, Tom
Re: adding a 1st generation board ?
Yes tom, I use only STW and DAS reverbs and performance really matters ... I will try to exchange it with a luna may be or just keep a 21 dsp system. Let's see what Xite will bring and I will decide what to do (as I use a macbook pro with a presonus lightpipe that receive 32 ADAT from my Scope PC). Thank you guys for your advice !