Hi
Does anyone know a small mixing device with direct-outs and also inserts on the mix channel? I tried the micro and the dynamic mixer but they haven't got inserts on the mix channel.
small mixing device
Thanks for answering.
Yes indeed..there aren't any inserts on the main/mix out. I'm looking for a way to group some tracks and do some filter things. I've used the bus from the 2448 but I can't switch it to pre/post aux. So if I use a low-cut filter with maximum settings on this bus, you hear the wet signal. I want the wet signal also to be cut..
Any other ideas?
Yes indeed..there aren't any inserts on the main/mix out. I'm looking for a way to group some tracks and do some filter things. I've used the bus from the 2448 but I can't switch it to pre/post aux. So if I use a low-cut filter with maximum settings on this bus, you hear the wet signal. I want the wet signal also to be cut..
Any other ideas?
To achieve that on the STM2448: Do not monitor the Busses in the mix directly, but route them to a channel. There you can add insert effects, group Aux sends etc.
The same for Aux effects, you can return them on tracks too where needed...
To do the trick with Busses, you'll need fdbk, a tiny device that introduces 1 sample delay (a la Xmod&Feedback Connector in modular). I tried searching it in Devices forum, but didn't find it. Maybe I got it from a developers' homepage, does someone know where to get it?
The same for Aux effects, you can return them on tracks too where needed...
To do the trick with Busses, you'll need fdbk, a tiny device that introduces 1 sample delay (a la Xmod&Feedback Connector in modular). I tried searching it in Devices forum, but didn't find it. Maybe I got it from a developers' homepage, does someone know where to get it?
more has been done with less
https://soundcloud.com/at0m-studio
https://soundcloud.com/at0m-studio
Hi,
that's new to me, that the feedback device can also be used to route busses back
Anyway you can find it on my <a href="http://www.worldless.com/sfp/hd.html" target"_blank">site</a>
cheers
Wolfgang
that's new to me, that the feedback device can also be used to route busses back
Anyway you can find it on my <a href="http://www.worldless.com/sfp/hd.html" target"_blank">site</a>
cheers
Wolfgang
I'll try explaining it with an example. I have 4 tracks. On one of them is a bit of reverb. If i route all 4 tracks to a bus and place a low-cut filter afterwards you'll hear (with the filter on maximum) the wet signal from the track with the reverb. ( I don't want a reverb on the whole bus because the other tracks don't need it) If i filter the bus-signal, the reverb has to be filtered too, but how??
That's how I came up with the idea of the mixer in the beginning of the thread..
If you put this mixer before the aux it'll work. Hard to explain but does anyone has a solution or a suitable mixer?
thanx
That's how I came up with the idea of the mixer in the beginning of the thread..
If you put this mixer before the aux it'll work. Hard to explain but does anyone has a solution or a suitable mixer?
thanx