pink big mixer save dsp power .

Omb · Post by **Omb** » Thu Nov 13, 2003 3:34 pm

hello everyone.
since i have only one card (pulsar2) and the
power of dsp is limited i allways try to find way to save it.
im shure that some of you noticed of that but some of you may not

the pink big mixer use a very minimal dsp power compare to the stm1632 that i usualy use for my project it also have an eq on
i think i'll start to use it more .

another thing(s) ,
is ther a manual for that mixer ?
does this eq is a quality one like the PEQ 4s
that came with rhe pacage of the card ?

cheers
Omb

[ This Message was edited by: Omb on 2003-11-13 15:41 ]

krizrox · Post by **krizrox** » Thu Nov 13, 2003 3:39 pm

The pink big mixer? What are you talking about? There is (or was) something called the big mixer but it is primarily blue in color.

I still use my "blue" big mixer a lot and I'm pretty sure I have the user doc for it. What do you need to know about it?

Omb · Post by **Omb** » Thu Nov 13, 2003 3:49 pm

yes it is blue .
in the 1632 there is a number above the vu metter indicate the level that have reached
does this mixer have this function.
also thrte is a buttons at the right corner
DIMTBCR outDIMtalk back etc.
what is the different between in1-in16 to the
m1-m16 if there is eny ?
where can i find documentation for that mixer ?

[ This Message was edited by: Omb on 2003-11-13 15:52 ]

[ This Message was edited by: Omb on 2003-11-13 15:58 ]

Immanuel · Post by **Immanuel** » Thu Nov 13, 2003 4:16 pm

The Big Pink Mixer is a visually modded Big Mixer. I think it was some leads, that are Pink instead of (insert original color name).

Omb · Post by **Omb** » Thu Nov 13, 2003 4:29 pm

there is a botton named inv above each chanel and when i prees it it chage the sound what this button actualy do?

Immanuel · Post by **Immanuel** » Thu Nov 13, 2003 4:38 pm

The same as any INV(ert) button on a mixer. It makes the positive part of the waveform negative and makes the negative part positive. It is mostly handy when you have more microphones on one source, because inverting the signal of one of them make the out of phase frequensies in phase (and the in phase frequensies out of phase). But it can be used for uther purposes too.

at0m · Post by **at0m** » Thu Nov 13, 2003 6:09 pm

I remember the BigMixer using 12mb per main and 8mb per bus panel, for the graphics.

braincell · Post by **braincell** » Fri Nov 14, 2003 8:27 am

also correct me if I am wrong but doesn't the bigmixer suffer from phase alignment problems?

at0m · Post by **at0m** » Fri Nov 14, 2003 1:00 pm

Yes, new mixers have the phase button, so you can choose to disable it, it's a bit lighter on dsp...

krizrox · Post by **krizrox** » Fri Nov 14, 2003 5:07 pm

Omb if you can provide an email address I can email you the PDF user manual for the Bug Mixer.

krizrox · Post by **krizrox** » Fri Nov 14, 2003 5:08 pm

Omb if you can provide an email address I can email you the PDF user manual for the Bug Mixer.

krizrox · Post by **krizrox** » Fri Nov 14, 2003 5:18 pm

Sorry for the double posts - something strange going on with this forum.

[ This Message was edited by: krizrox on 2003-11-14 17:20 ]

Post by **hubird** » Fri Nov 14, 2003 9:03 pm

good old Bug mixer, a girly compared to the STM serie.
What's more bad: a lovely girl afflicted with some annoying bugs, or a stern looking but perfect man?
That is, from a man's point of view!

Omb · Post by **Omb** » Sat Nov 15, 2003 2:30 pm

itamar27@hotmail.com

regards.

AndreD · Post by **AndreD** » Sun Nov 16, 2003 7:06 am

On 2003-11-14 13:00, at0mic wrote:
Yes, new mixers have the phase button, so you can choose to disable it, it's a bit lighter on dsp...

the stereo-tracks in the stm mixers are always phase-coherent (unlike big-mixers)

to get the whole mixer phase-coherent makes the phase-button necesarry only...

all the best,
andre

[ This Message was edited by: Andre Dupke on 2003-11-16 07:08 ]

krizrox · Post by **krizrox** » Sun Nov 16, 2003 8:54 am

I sent you the PDF files this morning. Let me know that you received them OK. Hope this helps!

krizrox · Post by **krizrox** » Sun Nov 16, 2003 8:59 am

On 2003-11-14 21:03, hubird wrote:
good old Bug mixer, a girly compared to the STM serie.
What's more bad: a lovely girl afflicted with some annoying bugs, or a stern looking but perfect man?
That is, from a man's point of view!

A funny observation. However, I noted some bugs in the STM mixers too so none of them are perfect. I had some problem with EQ curves or something. Anyone else seen that problem? I've always liked the big mixer. I like the way it is laid out. It seems to have the right layout and features for the way I like to work. The 2448 is nice but it's a big honker and takes a lot of moving around to get into it. The only problem I've noted with my big mizer is the channel designations will change randomly. Like the first 8 Input channels will acquire the names from the first 8 Mix channels. Weird.

Omb · Post by **Omb** » Mon Nov 17, 2003 1:20 am

thanks krizrox ,

i erase my junk mail before i notice your post , pleas send it again.

regards
Omb

krizrox · Post by **krizrox** » Mon Nov 17, 2003 5:59 am

I'll try sending again but if it doesn't go through this time, I give up. I'm not 100% sure but Hotmail may not accept messages with attachments unless you have an upgraded version of Hotmail (I think there are subscription services that provide additional features).

An update: the message came back again. Sorry! For what it's worth, the Big Mixer manuals are included on the Pulsar 2.04 CD.

[ This Message was edited by: krizrox on 2003-11-17 06:34 ]

spiderman · Post by **spiderman** » Mon Nov 17, 2003 6:30 am

Is there a way to have phase coherente AUX effect on the stm2448 ??