Sonic Timeworks : Classic Plate released

Warp69 · Post by **Warp69** » Sat Jun 12, 2004 1:19 pm

Hey,

First of all - the current version is a pre release of the reverb - there will be some changes for the actual release, like :

* 44.1/48/96 kHz support
* Filter switch (input/output)
* New presets
* Bug fixing

@deejaysly - No. Very few people have had problems regarding the keys. Most people receive their within 2-3 days after ordering. Unfortunately I have no influence on the handling of orders - thats the reason for the free chorus/delay thing.

@R0zzer - There will be a lite (both DSP and PCI) version of the reverb.

@voidar - For several reasons. The number of parameters have increased, so I needed a new design.

Cheers

[ This Message was edited by: Warp69 on 2005-09-02 00:12 ]

cannonball · Post by **cannonball** » Sat Jun 12, 2004 4:09 pm

hi

thanks for the info

ale

rodos1979 · Post by **rodos1979** » Sat Jun 12, 2004 7:57 pm

Hello to all!

@Warp69: when will the new version and the chorus plug-ins will be ready to download? Shall we (who have already bought the plugin) get notified by email?

Thank you!

P.S. How is the Ambience algo going?

Warp69 · Post by **Warp69** » Sun Jun 13, 2004 12:58 pm

Hey,

@rodos1979: The new version will probably be released next weekend. The Chorus/Delay is not yet finished, I have been busy with other projects. But hopefully it will be released within 2-3 weeks. At this moment I do not know how many items I have sold and therefore dont have any email adr. Im waiting for an email list right now. People could probably register via email.

kind regards

Plato · Post by **Plato** » Sun Jun 13, 2004 1:43 pm

On the GUI, I like the new one - seems a bit more intuitive - easier to understand....
looking forward to the final version

Dan · Post by **Dan** » Mon Jun 14, 2004 3:01 am

Hi Warp69, When I open a project with the P100, the graphic interface always open in the center of my 2 screens even I save it at the right place with the screenset, could you tell me more?
Thanks

jea · Post by **jea** » Wed Jun 23, 2004 5:53 pm

I bought the device monday, but have not received anything yet....

Does it take so long time to process my order?

I received e-mail from Sonic Timeworks.

But I am waiting ....

jea · Post by **jea** » Thu Jun 24, 2004 4:47 pm

Still no device ....

jea · Post by **jea** » Tue Jun 29, 2004 5:09 pm

uh! Forgot to tell;

I received it! Thanks to cc!

medusa13 · Post by **medusa13** » Wed Jun 30, 2004 2:46 pm

Warp69:
I just wanted to tell you that the p100 is the best sounding reverb I've heard.
I'm looking forward to try the chorus/delay device. When do you think I’ll be released?

Please, keep up the good work!!!

Warp69 · Post by **Warp69** » Sun Jul 04, 2004 4:34 pm

Hey Medusa13,

It will be finished very soon - I have just updated the graphic and implemented some new features.

Sorry for the waiting.

Kind regards

spiderman · Post by **spiderman** » Mon Jul 05, 2004 5:11 am

yes it sounds good but too much dsp consuming and these day for 300$ you can have a lexicon lpx15 II which sound better IMHO ( pcm91 algo inside ) .
the p100 has more parameter and more tweakable if you like . but the simplecity on my lpx15 II is just awesome and always musical. so if your have a large amount of dsp go for the p100 ( 15 dsp mini for a normal project 24 tracks with a stm2448 few plug ins and one p100 ) .
please creamware update the sharc !!!!!

Warp69 · Post by **Warp69** » Mon Jul 05, 2004 5:46 am

Hey Spiderman,

You're correct regarding the heavy DSP/PCI use of the plugs.

Cheers

[ This Message was edited by: Warp69 on 2005-09-02 00:14 ]

spiderman · Post by **spiderman** » Mon Jul 05, 2004 6:43 am

thanx for the correction warp69.
your verb is great indeed ! but it eat dsp like candy ! 8^) . i would like to use it every day . but it's not possible now due to the lake of dsp ( 14 dsp ).
about the lpx15 II the sound ( the plate algo ) is very very very close to the pcm91 to my ears ( even with half of the delays ). extern reverb is the only way to have good reverb without taxing the dsp which are working for other thing . but for owner of more than 15 dsp it's fully enjoyable .
so just an idea ? could you make a 55% delay of your P100 ?

[ This Message was edited by: spiderman on 2004-07-05 08:13 ]

Warp69 · Post by **Warp69** » Mon Jul 05, 2004 7:23 am

Hey Spiderman,

Have you tried the Timeworks 4080L? How does that one compare to your Lpx15 II?

The demo version of the P100 already include a DSP/PCI lite version - but if I made that one mono->stereo and removed the Modulation parameter and reduced the damping amount (24dB -> 12dB) I could save some DSP cycles. But that will take some time.

Cheers

[ This Message was edited by: Warp69 on 2005-09-02 00:15 ]

Warp69 · Post by **Warp69** » Mon Jul 05, 2004 7:26 am

[ This Message was edited by: Warp69 on 2005-09-02 00:16 ]

spiderman · Post by **spiderman** » Mon Jul 05, 2004 8:34 am

yes i'm aware !
like i said before the lpx15_II has far less parameter for sure !! sometimes it's not a bad thing and sometimes yes .but the sound is there ( maybe a little bit vintage now but in a good way ).
the point is that your reverb is fantastic but in my case using dsp reverb on my system (P3S1.4g; i815 , P+ ,P2+ ,SRB is not easy I have to bounce track etc ..) or I need a dedicaced PC . and your price is ridiculously low ( a good point ! ) maybe to save money for another card ? 8^)
so we need far more powerfull dsp to fully enjoy devices like yours .

[ This Message was edited by: spiderman on 2004-07-05 09:35 ]

medusa13 · Post by **medusa13** » Mon Jul 05, 2004 11:44 am

Hey Spiderman:
I don't know what you mean by eating a lot of dsp. I mean, you just said you have a P+, P2+ and SRB. I asume it's a Pulsar 1 a pulsar 2 and SRB, wich adds up to 23 dsps (?).
Have you ever tried another reverb for Scope? like the ones by DADev (are they still available?)

I only have 1 Pulsar II, and I´m more than happy with this device and it's results, wich takes only half the power of my card.

I think the p100 delivers the goods, and has a more than great quality/price relation.
And if this wasn't enough, it looks cool.

spiderman · Post by **spiderman** » Tue Jul 06, 2004 3:22 am

4+6+4=14 dsp

I manage a large quantity of tracks 24 and often more with the stm2448 . with vintage eq , vinco , delay , chorus whatever .
if I want a reverb for the snare , an other for the vocal , another for guitar for exemple i can't ( out of pci /dsp after only one P100 ) . ok if I use the masterverb but it's not at all on the same league as the P100 . so I prefer using external reverb . I would be happy to have a reverb dedicaced PC . but my old lpx15-2 do the job very well . I've test some vst reverb ( waves ) but I'm not happy with the result . I heard a sound with a reverb . with the lexicon I heard a sound in a room . as i've said this device is fantastic but I think the creamware plateform
is not optimized at all for reverb . the p100 demo I've tested didn't have preset so maybe it's hard to compare . i tried to make the same sound as the lpX15-2 big plate . but didn't reach the point . maybe it's me but the lpx15-2 seems wider . but as i've said it's not justice to compare this complex devices with no preset . but i have to say the p100 sound sweet and have the lexicon sound , no doubt

[ This Message was edited by: spiderman on 2004-07-08 07:28 ]

Warp69 · Post by **Warp69** » Tue Jul 06, 2004 3:39 am

No presets??? There are over 50 presets.....

Cheers

[ This Message was edited by: Warp69 on 2005-09-02 00:16 ]