luna 2 q ....

erezx · Post by **erezx** » Tue Dec 17, 2002 8:59 am

hey all - just bought the luna 2 ...
1.what is the prffer irq latency u work on ?
2.what is the preffer ullli i should put
(working on 44.1 hz )
thanx

marcuspocus · Post by **marcuspocus** » Tue Dec 17, 2002 9:27 am

A1: Any IRQ which is not shared with anything else, preferably IRQ5 or IRQ9

A2: lowest you can without clicks&pops.

From 3ms to 7ms your pretty safe with asio.

With WDM driver, i really don't know, some application can go down to 11ms, other can't seem to work properly with anything lower than 25ms...

erezx · Post by **erezx** » Tue Dec 17, 2002 12:53 pm

gee thanx -
i ment the irq latency time - which i configured on 64 :-0 - hope it's good .
also took the ulli 2 7 ms ...
on 44.1 khz ....
hope im doing good
10x

marcuspocus · Post by **marcuspocus** » Tue Dec 17, 2002 1:57 pm

If it's working, then it's good!

Have some fun with your card now, and post some music here on planetZ!

erezx · Post by **erezx** » Wed Dec 18, 2002 4:26 am

well since - now my pc stands on :
-pci latency on 64
-ulli on 7 ms
-also tried LUNA priority on low &
SX priority on normal .
Well SX crushed from some reasons -
can't tell u why ( i guess i was 2 stoned )

erezx · Post by **erezx** » Wed Dec 18, 2002 11:57 am

ok - problem # 1 ....
i use yamaha sx and he sends midi in
(donno if it's connected - heppend
just right after i pressed the keboard )
i get blue screen saying
irql ...... latency ..... or equall ...
should i raise or gain my irq latency ??
( now it's 64 )
10x

Herr Voigt · Post by **Herr Voigt** » Wed Dec 18, 2002 6:23 pm

Should be no problem of PCI latency. You should change this only if you use several instances of MasterVerb or if you use fat multisamples with high polyphony. Then if it crackles or you have dropouts, try a PCI latency of 96 or 128.

Greetz, Thomas

erezx · Post by **erezx** » Thu Dec 19, 2002 6:03 am

tahnx
back 2 32

works great