JoPo wrote:Wow ! Peter, did you reinstall windows each time ? I'm not sure it helps.
Well... Backup your dsp folder, then delete it, then copy the dsp folder I made. It seems to be clean for Scope 7. I added all third part dsp's I collected since years + all new Scope 7 dsp's overwrited those that was older. Maybe there will miss some rare files but you certainly have them.
Peter4724 wrote:JoPo wrote:Apparently, there are DAS dsp files in Scope 7.0 installer and maybe some have been updated to work with Scope 7. Maybe you could install Scope 7 on another computer, then copy dsp files on a usb stick in order to overwrite them on your Scope computer dsp folder.Peter4724 wrote:I have V7 reinstalled clean and then the dsp, sys .. files from DAS, Orbitone .... copied. The Legend and Master it EQ crash Windows. I will try a different method tonight.
I tried to extract the files from the Scope 7 setup with "Universal Extractor" but it was not able to do the job ! So I did like Shayart : I installed it on an old laptop and copied all the Scope 7 folder to keep all those files somewhere. Just in case...
first attempts by last night.
1. Scope 5.1 84 bit backup (all plugins are working properly)
2. Clean Windows 10 64 bit installation
3. Installation Scope v7
4. Copy all original DAS dsp, sys files from Sonic Core page into the right folder.
5. THE Legend and Master It EQ crash Windows. (DAS coef11 .sys)
second attempts last night.
1. Clean Windows 10 64 bit installation
2. Installation Scope v7
3. Copy all DAS dsp, sys files from old Scope 5.1 installation into correct folder.
4. THE Legend and Master It EQ crash Windows. (DAS coef11 .sys)
third attempts last night.
1. Clean Windows 10 64 bit installation
2. Installation Scope v7
3. Copy all dsp, sys files from old Scope 5.1 installation into correct folder.
4. Installation again Scope v7
5. THE Legend and Master It EQ crash Windows. (DAS coef11 .sys)
I give up
in all the stages you missed one thing.....( Do not copy DAS dsp files at all )
1-Do not copy DAS dsp files at all ! ! ! It already exists iv v7 !
2-copy only dev files !!! And note that it is 64bit
3-download Here (64 bit)
http://scope.zone/index.php?id=1978&lg= ... dows_64bit
And that will solve the problem
And if you do not want to reinstall....Replace the dsp files From the link
https://www.dropbox.com/s/kw6dew3idc0g8c6/Dsp.rar?dl=0 (Original files from V7 installation)
Yeah ! Great ! Yes, it's meJoPo wrote:Oh ! There IS 2 videos on Scope Zone showing Xite-1 ! I didn't saw them before !
http://scope.zone/index.php?id=1579&lg=en
One from LiquidEDGE and the other from Shay Dan, it's you, Shayart, right ?
Peter4724 wrote:in all the stages you missed one thing.....( Do not copy DAS dsp files at all )
1-Do not copy DAS dsp files at all ! ! ! It already exists iv v7 !
2-copy only dev files !!! And note that it is 64bit
3-download Here (64 bit)
http://scope.zone/index.php?id=1978&lg= ... dows_64bit
And that will solve the problem
And if you do not want to reinstall....Replace the dsp files From the link
https://www.dropbox.com/s/kw6dew3idc0g8c6/Dsp.rar?dl=0 (Original files from V7 installation)
Thank you!!
I did it the same way and now it works.
Peter
But aren't you on earth ??dawman wrote:Anyone care to share a newly skinned project window?
I need to be tormented.
How’s the XITE-1 working with new resource management?
Any new modules?
Cool.JoPo wrote:Oh ! There IS 2 videos on Scope Zone showing Xite-1 ! I didn't saw them before !
http://scope.zone/index.php?id=1579&lg=en
One from LiquidEDGE and the other from Shay Dan, it's you, Shayart, right ?
You said it !Liquid EDGE wrote:Bit old, need to get round to doing a new one with v7 at some point.
Are you using the lite version of MASTERIT ?Peter4724 wrote:I have V7 reinstalled clean and then the dsp, sys .. files from DAS, Orbitone .... copied. The Legend and Master it EQ crash Windows. I will try a different method tonight.
<3I wonder if you can remove the multi fx in front of the mixer now due to v7?JoPo wrote:But aren't you on earth ??dawman wrote:Anyone care to share a newly skinned project window?
I need to be tormented.
How’s the XITE-1 working with new resource management?
Any new modules?
New colors in the project window : Scope 7.0 is the most stable / Xite dsp friend version ever ! There are still some improvements to do but it's worth it !
You mean all inserts I use inside the STM ? Well... I'm quiet sure that even with Scope 57.0 (like firefox !) , it will be much more good for dsp's power to do like that.Liquid EDGE wrote:I wonder if you can remove the multi fx in front of the mixer now due to v7?
Interesting. Yeah was just wondering if v7 greatly improves dsp spread regardless of one device or many.JoPo wrote:You mean all inserts I use inside the STM ? Well... I'm quiet sure that even with Scope 57.0 (like firefox !) , it will be much more good for dsp's power to do like that.Liquid EDGE wrote:I wonder if you can remove the multi fx in front of the mixer now due to v7?
I think it distributes better on each dsp the load than all in only one device. Moreover, I use to have the 2 multifx you see before the DC filter in which there is my mastering chain (reday for when the project is finishing but muted before) , one inside the second and it is what crashed Scope 7 when loading.
After having separate them, I get back some dsp's power. And nomore crash. I'm very satisfy by Scope 7 : it is good for Xite-1 dsp's ! It seems to have even more power than with 5.1 !
Yes, I noticed that on the video ! You've got all in the mixer ! The way I did first when I had my Xite-1 unit.Liquid EDGE wrote: it still “feels” weird to me having fx stacked up outside the mixer before the trim.
that's the reason why it is made. the channel modules are nothing more than glorified effect racks grouped by 4/8/12... plus all the midi CC stuff. It works even better in scope 7.Liquid EDGE wrote: Partly why I got mod mixer v2 to do the same sort of thing, it still “feels” weird to me having fx stacked up outside the mixer before the trim.
