Uhe diva

astroman · Post by **astroman** » Mon Mar 02, 2015 3:21 am

I've tried Sylenth once because there's a full midi-mapped controller patch for Lemur
having read about it's sound and filters I was really astonished how few was left
imho it's the coward synth... bails out when it get's critical

(which means instead of just performing a sweep, there's a kind of supervision instance to take the wheel when things get hot)

@tlaskows: the ProWave is a smart way to bring a device to it's essentials
Solaris isn't too complicated once you start to leave out things
it needs some mental preparation which of the oscillators, filters and lfos you're gonna use
to understand a 'foreign' patch is indeed somewhat demanding

cheers, Tom

ronnie · Post by **ronnie** » Mon Mar 02, 2015 5:58 am

jhulk wrote:i actually prefer http://www.lennardigital.com/sylenth1/

uses way less cpu than the diva and through scope sound great
diva as soon as you start stacking the sounds the cpu goes through the roof making it a mono patch

and unlike dsp if you over load you just remove poly but still plays with no glitches

diva if your preset is very complex and stacked it drops out sound and stutters i wish it had a feature like scope telling you that the patch uses to many resources

but must admit most of my favorite plugs are on the ni reaktor

and mach5 3

There's a "Multicore" button on the Diva. Switch it off and the drop-out and stutters go away IME. Also, make sure that the build is 2165. (Build # is shown on the lower right wood side panel in tiny numbers) I had some problems when I installed the "hotfix" build where the prior unpatched VST would still load until I completely deleted the file. These "tips" helped a lot with the drop-outs and stutters.

astroman · Post by **astroman** » Mon Mar 02, 2015 7:10 am

shure it must be build 2165 - that's a secret hint... as Scope's Sharcs are named ADSP 21065

cheers, Tom

ronnie · Post by **ronnie** » Mon Mar 02, 2015 8:16 am

astroman wrote:shure it must be build 2165 - that's a secret hint... as Scope's Sharcs are named ADSP 21065

cheers, Tom

Nice one!

tlaskows · Post by **tlaskows** » Tue Apr 14, 2015 3:40 pm

Hmm, I haven't had any dropouts with the demo. It hardly touches my CPU (4770k) on most patches.

-Tom

ronnie · Post by **ronnie** » Tue Apr 14, 2015 8:37 pm

tlaskows wrote:Hmm, I haven't had any dropouts with the demo. It hardly touches my CPU (4770k) on most patches.

-Tom

Here is the most recent version. I got an email about it concerning some issues while beta-testing Cantabile 3.0. You need to use the link below because you can't get to it from the folder URL.

Here is the most recent revision of Diva 1.30 (3441 - 03-30-2015)
http://www.uhedownloads.heckmannaudiogm ... 441Win.zip

It fixed the multi-core problem I was having.

PS: Here's my custom skinned version:

: DIVA 3441.jpg (32.28 KiB) Viewed 3369 times

tlaskows · Post by **tlaskows** » Wed Apr 15, 2015 10:57 am

I will try it out later. Thanks.

I might want to buy it in the future. The sound is very good.

-Tom

dawman · Post by **dawman** » Thu Apr 16, 2015 4:45 am

u-He synths are great and the support and programming is excellent.
I also liked Diva but waited for Zebra2 to incorporate the Diva FIlters, hence Zebra 2 HZ (Hans Zimmer) so I could get the best of both worlds.
Even though an entire Core is needed, and to keep the Matrix Modulation Routing they sacrificed Multi Core. Big Deal....
Use 2 x instances for a pair of Zebras. One with Diva, the other MultiCore Zebra 2.

First rule of soft synth purchases.
Why buy one, when you can have 2 for twice the price.

ronnie · Post by **ronnie** » Thu Apr 16, 2015 9:50 am

dawman wrote:u-He synths are great and the support and programming is excellent.
I also liked Diva but waited for Zebra2 to incorporate the Diva FIlters, hence Zebra 2 HZ (Hans Zimmer) so I could get the best of both worlds.
Even though an entire Core is needed, and to keep the Matrix Modulation Routing they sacrificed Multi Core. Big Deal....
Use 2 x instances for a pair of Zebras. One with Diva, the other MultiCore Zebra 2.

First rule of soft synth purchases.
Why buy one, when you can have 2 for twice the price.

Smart move, I f'd up on the research. So now I have to buy 2 more. Zebra2 and ZebraHZ. _)x(_

tlaskows · Post by **tlaskows** » Thu Apr 16, 2015 10:37 am

I've only played around with the Diva. I will check out the other synths for sure!

-Tom

dawman · Post by **dawman** » Sat Apr 18, 2015 12:27 pm

Zebra w/ the Diva Filters gives you FM synthesis, Wavteable extreme and for old Monophonic and Duophonic leads this synth piles on the oscillators and the Dive Filter makes it a serious weapon.

Actually retired a pair of SE-1Xs, shrank the racks and quite happy.

Just 2 years ago I all but gave up on Native synths. Never found 1 that sounded full enough to use against Marshall and Ampeg stacks, much less the 30 inch kick drum our drummer uses.

These dogs hunt.
If you need FAT BASTARD presets, I got 'em.
Most guys there @ KVR are Pad lovers, and arpeggio geeks, they make great presets, but no set of big balls is complete without Hair.

tlaskows · Post by **tlaskows** » Sun Apr 19, 2015 9:13 am

I think I have a problem and this problem is too many Scope synths

Zebra looks nice and I would love some FM type sounds. I used to have a TX802, but it was impossible to program...

-Tom

Marco · Post by **Marco** » Sun Apr 19, 2015 9:37 am

Try the FM BUNDLE on the SCOPE Website Shop. Only 69€! I have these greate FM!

tlaskows · Post by **tlaskows** » Sun Apr 19, 2015 9:59 am

Hmm, yes!

6 operator FM synthesis is what I need haha

Thanks for the suggestion.

-Tom

Marco · Post by **Marco** » Sun Apr 19, 2015 10:55 am

I realen must say, one of my best buy I ever Made in Scope Shop

Just try, you will be magified by this Device!

petal · Post by **petal** » Sun Apr 19, 2015 11:16 am

I have never tried the FM Bundle, but I do like the sound of this one from CWModular:

http://www.cwmodular.org/device-dxcwm.html

There's also the FM4: - I can't find a link, but it's good, free and its out there

Marco · Post by **Marco** » Sun Apr 19, 2015 12:27 pm

Ohhhhje this looks good but many Parameters, and the Sound? I should download and install.

AT the Moment i can only say, that it was love AT First sight when i tried first time. And the Sound is FAT. Its not a fm7 NI Choke. IT Has a serious sound.

You can rebuild original patches Too.

Post by **SilverScoper** » Sun Apr 19, 2015 2:22 pm

Well, at the moment I'm checking out Zebra and trying to work out why it would be worth nearly double the price of something like Quad (which is kinda looks and sounds like a Vectron on Steroids) : https://soundcloud.com/rob-papen/the-qu ... -by-artist

: Rob Papen Quad; quad.png (473.27 KiB) Viewed 3217 times

tlaskows · Post by **tlaskows** » Sun Apr 19, 2015 2:42 pm

The Quad sound is not too bad, but it's pretty weak compared to Diva. Plus, it only works with Reason. I use Sonar.

I will look at that CWModular freebie FM synth for sure. I checked out the short demo and the sound is sweet.

-Tom

tlaskows · Post by **tlaskows** » Fri Apr 24, 2015 2:04 pm

Hmm,

The CwmDx uses way too much DSP. Only 3 card system, around 30% at 6 voices.

How is the FM bundle in terms of DSP usage?

-Tom

PlanetZ forums - scopeusers.com

Uhe diva

Re: Uhe diva

Re: Uhe diva

Re: Uhe diva

Re: Uhe diva

Re: Uhe diva

Re: Uhe diva

Re: Uhe diva

Re: Uhe diva

Re: Uhe diva

Re: Uhe diva

Re: Uhe diva

Re: Uhe diva

Re: Uhe diva

Re: Uhe diva

Re: Uhe diva

Re: Uhe diva

Re: Uhe diva

Re: Uhe diva

Re: Uhe diva

Re: Uhe diva