2 x Pulsar II Classic on Intel DP35DP pci slots

[nipp&patt]

Hi guys,
is there a way to install 2 Pulsar II Classic on 2 adjacent PCI slots? Seems there is no enough headroom to do as the down side smaller board (screwed on the larger one and placed on first PCI slot ) touches the upper side of the second in the other slot. Someone here was succesful doing it?
Thanks very much

[garyb]

sure, lots of people have used that motherboard for 2 and 3 cards.
there should be a nylon/plastic shield on the part of the card that touches the other, so it shouldn't be a big problem if they're close as long as there is good air circulation in the case.

[Music Manic]

Ye same Mobo going strong here for years.

[nipp&patt]

Yeah there are plastic sheets, I' ll try and add another good fan for air circulation as also my first Pulsar was a little too much hot...Thanks once again!

sure, lots of people have used that motherboard for 2 and 3 cards.
there should be a nylon/plastic shield on the part of the card that touches the other, so it shouldn't be a big problem if they're close as long as there is good air circulation in the case.