Free ControlPack

Scope device files created using the Scope SDK

Moderators: valis, garyb

Post Reply
User avatar
Peter4724
Posts: 78
Joined: Mon Jun 25, 2001 4:00 pm
Location: AUSTRIA
Contact:

Free ControlPack

Post by Peter4724 »

Hi all
Often very useful!

r
Peter
Control Pack.PNG
Control Pack.PNG (151.52 KiB) Viewed 5769 times
Attachments
ControlPack.zip
(792.08 KiB) Downloaded 755 times
Ditykman
Posts: 91
Joined: Sat Apr 06, 2013 5:08 am

Re: Free ControlPack

Post by Ditykman »

Thanks again Peter.
User avatar
erminardi
Posts: 1575
Joined: Fri Apr 30, 2004 4:00 pm

Re: Free ControlPack

Post by erminardi »

Peter saint immediately!!!
4PC + Scope 5.0 + no more Xite + 2xScope Pro + 6xPulsarII + 2xLunaII + SDK + a lot of devices (Flexor III & Solaris 4.1 etc.) + Plugiator.
User avatar
t_tangent
Posts: 849
Joined: Sun Dec 28, 2003 4:00 pm
Location: UK

Re: Free ControlPack

Post by t_tangent »

Thank you Peter, yes very useful. Will download when I get home later. Cheers. :)
jksuperstar
Posts: 1598
Joined: Mon Nov 15, 2010 12:57 pm

Re: Free ControlPack

Post by jksuperstar »

The spectrum analyzer is so very useful for tuning in channel EQ and master compressors, thank you!
petal
Posts: 2354
Joined: Sun Sep 15, 2002 4:00 pm
Location: Copenhagen
Contact:

Re: Free ControlPack

Post by petal »

Yes - the spectrum analyzer was just what I've been looking for!

Thank you very much :)
JoPo
Posts: 2306
Joined: Wed Jun 05, 2002 4:00 pm
Location: VRRAAaaooOôOooommmh
Contact:

Re: Free ControlPack

Post by JoPo »

2 months without any new Peter's device was harrRRrd !
:D

Thanks thousands times a lot !

The 'res' input is for reseting vu meters, isn't it ? Is it a audio input ? What kind of signal should we send in it ?
> > > > > > > > > > > > --- Musica --> here ! ---< < < < < < < < < < < <
User avatar
Bud Weiser
Posts: 1903
Joined: Tue Sep 14, 2010 5:29 am
Location: nowhere land

Re: Free ControlPack

Post by Bud Weiser »

Thank you very much, Peter ! :o
That´s a device I waited for since I own XITE-1. :)

best

Bud
S|C Scope/XITE-1 & S|C A16U, Scope PCI & CW A16U
User avatar
ShogunSpy
Posts: 313
Joined: Wed Sep 26, 2012 1:28 pm
Location: San Francisco
Contact:

Re: Free ControlPack

Post by ShogunSpy »

Thanks Peter you are very kind. I find this very easy and informative to use.
sepuka
Posts: 34
Joined: Thu Jun 13, 2013 11:21 am

Re: Free ControlPack

Post by sepuka »

Please, check RMS meter. Sinusoidal with peak -19 dB / RMS -22 dB (at another meter) indicated peak = RMS = -19 dB (+3 db RMS probaby for sinusoidal/square normalisation?) For noise with peak -30 dB / RMS -42 dB indicated peak = RMS = -33 dB. Or add controls for meter ballistic (rise/fall/hold/integration time).
User avatar
sunmachine
Posts: 391
Joined: Mon Mar 01, 2010 12:37 am

Re: Free ControlPack

Post by sunmachine »

Thanks again, Peter!
Just noticed that the analyzer LEDs can be activated with the mouse (click on an LED and move the mouse).
Yogimeister
Posts: 315
Joined: Sat Jan 12, 2008 10:12 am

Re: Free ControlPack

Post by Yogimeister »

Peter,

I ran some white noise tests to try and troubleshoot an issue (maybe not an issue) I am experiencing with my new DAS compressor pack
http://forums.planetz.com/viewtopic.php?f=1&t=33046
(I would appreciate your input if you have any ... ;)


During this - I used some white noise and got this peculiar output from the ControlPack
Pure WHite.JPG
Pure WHite.JPG (35.58 KiB) Viewed 5145 times
Is the ControlPack spectrum display weighted ?
Immanuel
Posts: 3018
Joined: Thu Oct 25, 2001 4:00 pm
Location: Aalborg, Denmark

Re: Free ControlPack

Post by Immanuel »

I don't think it is really easy to make real white noise. Maybe I am wrong. If your monitors go low enough you will hear lots of sub bass "blobs" from the Scope white noise generator. Have you tried a sweep?
Information for new readers: A forum member named Braincell is known for spreading lies and malicious information without even knowing the basics of, what he is talking about. If noone responds to him, it is because he is ignored.
Yogimeister
Posts: 315
Joined: Sat Jan 12, 2008 10:12 am

Re: Free ControlPack

Post by Yogimeister »

Immanuel wrote:I don't think it is really easy to make real white noise. Maybe I am wrong. If your monitors go low enough you will hear lots of sub bass "blobs" from the Scope white noise generator. Have you tried a sweep?

Yeah, Maybe it's not "oversampled" enough... That's why for the "stereo White noise" in my troubleshooting thread (where I noticed these "dynamic" fluctuations) I used 4 generators (2 for each channel) to average these "perturbations" ....

In any case - they are "blobs" but the reading in the image above stays steady (and is VERY different from the other spectrum analyzer (basically running in parallel ...)
User avatar
TOM.DJ
Posts: 47
Joined: Tue Oct 05, 2004 4:00 pm
Contact:

Re: Free ControlPack

Post by TOM.DJ »

This looks great!
Will this pack also work with the Xite1 - Scope 64Bit?

Thanks!
User avatar
ShogunSpy
Posts: 313
Joined: Wed Sep 26, 2012 1:28 pm
Location: San Francisco
Contact:

Re: Free ControlPack

Post by ShogunSpy »

TOM.DJ wrote:This looks great!
Will this pack also work with the Xite1 - Scope 64Bit?

Thanks!
Yes I use it all the time with W7 64bit and Scooe 5.1. Great meter
User avatar
dante
Posts: 4467
Joined: Sat Nov 24, 2001 4:00 pm
Location: Melbourne Australia
Contact:

Re: Free ControlPack

Post by dante »

A useful addition ... Thanks !!
User avatar
Spielraum
Posts: 523
Joined: Fri Apr 18, 2014 1:11 pm
Location: Raumschiff Erde

Re: Free ControlPack

Post by Spielraum »

hello peter, fantastic package
...and i dream of a modular version + oszi
many thx!
|̲̅̅●̲̅̅|̲̅̅=̲̅̅|̲̅̅●̲̅̅] Lange Welle ~ Mittelwelle ~ Kurze Welle ~ Ultra Kurze Welle
Post Reply