P5W DH DELUXE
I have Error problem.It has just started today, now every few minutes
System in crash-
But it had worked fine for few months
Maybe is motherboard asus p5w dh deluxe ????
do you know ?????
Thank
crash with p5w dh deluxe e chipset 6600 intel
Re: crash with p5w dh deluxe e chipset 6600 intel
maybe something has come lose. open it up and reseat every card and connector.
also make sure the crud is cleaned out of the heatsink. and the fan is spinning
more often than not its something simple and mechanical like that.
next most likely culprit is the power supply a lot of them are really cheap (even some of the so called good ones)
also make sure the crud is cleaned out of the heatsink. and the fan is spinning
more often than not its something simple and mechanical like that.
next most likely culprit is the power supply a lot of them are really cheap (even some of the so called good ones)
Re: crash with p5w dh deluxe e chipset 6600 intel
hi , i have bought update kontakt 3
first i work with player kontakt 2.2 for sampleLOgic-
now no run nothing ---
i must format new, but i don't know if there is problem -
thank
first i work with player kontakt 2.2 for sampleLOgic-
now no run nothing ---
i must format new, but i don't know if there is problem -
thank
Re: crash with p5w dh deluxe e chipset 6600 intel
Perhaps no need to install the kontakt 2.2 hours if there is a complete thank kontakt
you say?
you say?
Re: crash with p5w dh deluxe e chipset 6600 intel
check your card for dust, connections on pci slots and stuff like that first...
it happened to me recently, i had pci-overflow going in loops.
The scope board was dusty due to video card fan, and there was an insect in between dsp connection, may be causing some "bug"...
now all is fine, may be check that before reformatting (because in my experience, reformatting never solved anything, except removing virus and things like that).
it happened to me recently, i had pci-overflow going in loops.
The scope board was dusty due to video card fan, and there was an insect in between dsp connection, may be causing some "bug"...
now all is fine, may be check that before reformatting (because in my experience, reformatting never solved anything, except removing virus and things like that).