why sound delay through ADAT? will set latency to 3ms solve

dxl · Post by **dxl** » Sat Mar 16, 2002 11:29 pm

why sound delay through ADAT? will set latency to 3ms solve it?

or Z-link is the only solution?

Post by **garyb** » Sat Mar 16, 2002 11:44 pm

i have no such problem.........

kimgr · Post by **kimgr** » Sun Mar 17, 2002 11:20 am

There is no delay on the Adat ports on Creamware cards.
Please try and reboot yourself, and try again

(And hope that a complete reinstall is not required).

Kim.

felix o. · Post by **felix o.** » Mon Mar 18, 2002 12:59 am

have you had the software monitor on? if yes, turn it down and listen to you´re recording source via the pulsar mixer.

felix

dxl · Post by **dxl** » Mon Mar 18, 2002 1:21 am

opps! it's actaully ok!
but the analogo in put have the delay for sure tho.

at0m · Post by **at0m** » Mon Mar 18, 2002 1:37 am

On 2002-03-18 01:21, dxl wrote:
opps! it's actaully ok!
but the analogo in put have the delay for sure tho.

No, DXL, ALL hardware I/O's are REALTIME. Well, there can be slight phase-differences, but you can avoid that using 'Phase Compensation' on your DynaMixer and PulsarMixer.

ONLY software I/O's have latency, due to a computer's structural limits. The lowest latency on ANY pc software driver is 1ms.

If you use no software, you have 0ms latency. You're really getting me nervous this time, have you ever read something in a manual or visited http://www.creamware.de ? Guess not.

When you use strictly hardware I/O's to mix on ie. PulsarMixer, your mixer is as fast as your Claude Young's http://www.Rodec.be dj mixer. Or as a Mackie. There is no latency via hardware.

Midi there might introduce latency, but then again, that's due to the midi format, cables etc.

Now that you've clearly proved that you know sh!t about what you're saying, pls stop that madness. Get a grip man.

dxl · Post by **dxl** » Mon Mar 18, 2002 2:57 am

woe thank for tell me the phase compression,
i have the latency issuse but it's not that "big" so i don't really care that much.
but cool, you catch me on this software knolodge. But is that on other sounds?
Thank you! and i'm greatful making you happy!
not joking.
cya!

dxl · Post by **dxl** » Mon Mar 18, 2002 2:59 am

recently i'm reading the modular2 meanual!
huge!

at0m · Post by **at0m** » Mon Mar 18, 2002 3:02 am

I must admit I haven't studied that one yet. I've browsed it a couple of times, yes. But I couldn't make a decent patch.