Dynamic Mixer

FG445 · Post by **FG445** » Thu Mar 02, 2006 1:39 pm

Hi there,

first of all - sorry for a new Topic for such a small question

Now my question:
I want to route the signal of my first channel strip in the dynamic mixer to the output 1l/1r. Now , how can i route the signal just there , so that it is not going through the mainmimx channel?

I hope u get my problem , it should be easy , right?

Best

Daniel

virtualstudio · Post by **virtualstudio** » Thu Mar 02, 2006 3:21 pm

unclick the green button

FG445 · Post by **FG445** » Thu Mar 02, 2006 3:59 pm

alright , this sounds easy...

But which green Button do u mean?
I don´t see any green Button.
Maybe this is totally stupid

But please help me anyway....

Cheers

Daniel

virtualstudio · Post by **virtualstudio** » Thu Mar 02, 2006 4:23 pm

sorry to quick, I was thinking about stm mixers

FG445 · Post by **FG445** » Thu Mar 02, 2006 4:40 pm

is this possible with the dynamic mixer at all?
To route the signal from one channel ago the sum channel?

wayne · Post by **wayne** » Thu Mar 02, 2006 9:08 pm

You may have to use STM 1632 (with green 'send to mix' button)

FG445 · Post by **FG445** » Fri Mar 03, 2006 10:01 am

there is a point in the manual which says :

turn off the "mix" button...
the overview of the manual points to page 8 for that...
Either i am stupid or the guys who wrote that manual are...
There is nothing about such a knob on that page neither on this, nor on any other page of the "dynamic mixer" manual..
Can someone clearify this???

Best

Daniel

<font size=-1>[ This Message was edited by: FG445 on 2006-03-03 10:03 ]</font>

<font size=-1>[ This Message was edited by: FG445 on 2006-03-03 10:03 ]</font>

wayne · Post by **wayne** » Fri Mar 03, 2006 10:37 am

OK. You can't do what you want to do on the dynamic mixer. Use another one, or just route differently.

djmicron · Post by **djmicron** » Fri Mar 03, 2006 1:23 pm

On 2006-03-03 10:01, FG445 wrote:
there is a point in the manual which says :

turn off the "mix" button...
the overview of the manual points to page 8 for that...
Either i am stupid or the guys who wrote that manual are...
There is nothing about such a knob on that page neither on this, nor on any other page of the "dynamic mixer" manual..
Can someone clearify this???

Best

Daniel

>

this is not from the dynamic mixer manual.

FG445 · Post by **FG445** » Fri Mar 03, 2006 1:25 pm

awwwwww,

shit. because the dynamic mixer is the only one with that much individual outs...
The other mixers work with just a few sum busses. This is really bad. I think this should be possible with the dynamic mixer. Because, when i route the signal into my host application from the mainmix, i have lets say the bass going into my host over the mix output. When i now want to route that bass over an individual out into the host, to eq it there, then i have the signal doubled there. I dont want this channel - here the bass ch strip - in my mix out...
How can there be a mixer with individual outs when one cannot route the signal from one channel ago the mix channel to a seperate out???
Thanks wayne , btw

Can one help me to get my feet on the ground here ?

Best

Daniel

Post by **garyb** » Fri Mar 03, 2006 1:44 pm

both the stm1632 and 2448 have direct outs on every channel.

ARCADIOS · Post by **ARCADIOS** » Fri Mar 03, 2006 1:55 pm

there is a small litle botton in 2448 and 4896 that if you press it, the direct outs will appear. the botton is called "direct outs".
press it

FG445 · Post by **FG445** » Sat Mar 04, 2006 7:34 am

alright, thanks thanks - now the show can go on

Have a nice weekend!

Cheers

Daniel