cpu speed vs ulli setting

firubbi · Post by **firubbi** » Fri Sep 02, 2005 8:02 am

hello all,
does it depands on cpu speed to gain 4ms latency? im still on 25ms and its diffcult to rec a vsti bass.
thanks

Music Manic · Post by **Music Manic** » Fri Sep 02, 2005 9:13 am

What are your symptoms?

firubbi · Post by **firubbi** » Fri Sep 02, 2005 9:19 am

time delay when i want to rec a giga bass. if i pull down ulli to 4ms(44.1khz) it seems latency is ok but than again cpu start showing me around 70% uses and few crackles. it says 25ms but it feels 50ms when i want to play.
thanks

Music Manic · Post by **Music Manic** » Fri Sep 02, 2005 9:25 am

Seems normal if your processor is quite slow.you can try upping it to 13ms which should be ok.When you've done you're recording change ULLI because you won't need it once it's recorded.

firubbi · Post by **firubbi** » Mon Apr 17, 2006 2:37 am

hi, stardust im on 1.4 p4+ 1gbRdram+7200HD.
what could be the prob if i want to move to 7ms.
thanks

firubbi · Post by **firubbi** » Mon Apr 17, 2006 7:49 am

hamm.. does 120gb hd is slower than a 80gb?(both are 7200rpm@8ms seagate)

valis · Post by **valis** » Mon Apr 17, 2006 12:02 pm

1.4Ghz p4 is actually rather slow, in many ways slower than 1 Ghz p3. You should be able to get that motherboard close to or beyond 2Ghz with an upgrade.

Also, are you using a 1st generation product?

firubbi · Post by **firubbi** » Mon Apr 17, 2006 9:48 pm

yes valis thats the cause. i bought it when 1st p4 came out(2001 here in bnagladesh)is this the 1st generation product?
thanks

bronYaur · Post by **bronYaur** » Wed Apr 19, 2006 2:48 am

whit 4 ms I get some crakle and pops especialy whit reason in rewire,this problem seem resolved resetting ASIO driver in cubase sx 3 via "release asio driver in bakground"

ceck "release asio driver in background"
and apply
uncheck "release asio driver in background"
and reapply
in this way clicks and pops audio streaming problem @ 4ms seem finish bat @ 7 ms never this problem

I have p4 2.8 and one Gb of RDRAM @ 7 ms no problems all fine

sorry for my enghlis

<font size=-1>[ This Message was edited by: bronYaur on 2006-04-19 03:51 ]</font>

djmicron · Post by **djmicron** » Wed Apr 19, 2006 6:34 am

on my old p3 933 ghz i was able of 10 ms and with 4 ms i remember about blue screens and system crashes.

On my actual amd 3400 i can run @ 4 ms without any problems, but of course. the cpu load is much higher than working at 13 ms latency.