PlanetZ forums - scopeusers.com

Small Mixer family updated to v3 versions.
regards
maus

Thanks Bud
I hope to get some time on it today
regards
maus

When updating these devices, I used SpaceF's Mixer3 along side them to match VU levels at various optimal points (e.g. -3, -6, -12db).
I finally adjusted the output levels to match -3db input (from one input channel) at the outputs (Output set to 0db and approximating -3db and reflecting the Mix3 ...

A small offering of a family of stereo switchers aimed at various input and output switching needs, including:
Quick exclusive soloing of inputs and/or outputs;
Sending inputs to more than 1 output with the ability to solo one or more input or output at a time.
I hope you find them useful ...

Small Mixers have been updated.
See amended first post
maus

Hi Bud,
Yes I have seen these issues too, just haven't got around t investigating them as yet.
I will have a closer look when I get a chance.
The gains are definitely not right!
The graphic thing happened to me as well, but only once.
I built them that way so the schublades hide properly whilst ...

Is "phase lock" testing possible without using SDK ?
If yes,- how ?


Bud, I am sure it is possible to check phase in both scope and scope sdk.
I am no expert on phase measurement, but I think you can do it using similar setup to that shown below.
I just fed the same signal to all inputs and then ...

valis wrote: Fri Aug 15, 2025 8:46 am How tested are the current versions given above (Mix2)? I'll check phase.

I have run all mixers and tested most functions (controls, inserts, channel disabling, midi, presets, etc).
I don't think I missed anything but you never know.
Look forward to phase checking.
Thanks
maus

Hey Bud,
I am not sure about phase locking.
You have peaked my interest though and I might look into phasing to see what can be done.
I personally have never had an issue.
A lot of my mixing and mastering is now done in Cubase/Wavelab so I can use Izotope, Sonible and NuGen tools.
I do bring tracks ...

Hi There,
Updated (version 3) Small Mixer family.
Updates:
- Removed Drawers (Shublades) Open Drawers were not always displaying properly - now all controls are on the front panel,
- Optimised Range Text fields to better approximate actual dB levels, and
- Some minor optimisation of the panel ...

valis wrote: Thu Aug 14, 2025 6:11 pm How are they for phase lock on the PCI cards?

Unknown at this stage.
Haven't tested them for phase locking, sorry.
I am about to release the first versions, maybe someone can check on phase issues?
regards
maus

Thank you Maus,- these look great !
Would it be possible to get 3 or 4 stereo input channels ?

best,- Bud

Hey Bud,
I am building a family of these mixers 2, 4, 8 ,12 and 16 stereo channel models.
Most are done, still working on the 16 channel version.
Also have not really tested them as yet ...

All I want is two stereo inputs and one stereo output.

(Why small? I'm trying to keep my routing window tidy and save MIPS)


Hi There,
I have been working for a while now to produce mixers with minimum screen footprints,
I am in the middle of developing a number of mixers to meet this need ...

guppy wrote: Sun Aug 10, 2025 6:30 pm Thank you for all your nice plugins maumusmo !
It would be nice if we could have a look to your 16 channel version please, thank you

Hi Guppy,
Here is the Mix 16ab LP, hope it is useful for you.
Regards
maus

Thanks Bud
Ordered 2 cables 6 Pin
regards
maus

Thanks Gary
Appreciated it
maus

Hi There,
I have never used ZLink on my XITE-1/Creamware A16 setup, but I would now like to try these types of connections, but I cannot find a supplier for these cables!
Are they obsolete?
Do they have an alternate name?
Can anyone suggest where I might be able to purchase a couple of leads ...

It is true that the XITE clock in(slave) is faulty.

Yes, I was able to get a stable clock via ADAT B as long as XITE-1 was the master.
For some reason ADAT A crackled constantly with this setup.
It was completely unstable with XITE-1 as slave.

The ADAT A issue has resolved itself now I have AES ...

Hay Bud,
AES/EBU sync was the answer!
I have it working with the RayDAT as master and XITE as slave.
I am also slaving the A16 to RayDAT via BNC seems very stable now.
This setup also cured my issue with ADAT A crackling its brains out.
Thanks a lot for your input, I had not thought of using AES/EBU ...

Thanks Valis,
I missed the BNC/wordclock posts also I will check ScopeRise.
I feared it was an known issue with Xite and Scope 7.
Not a biggy given it works with ADAT 2 though,
I will check (again) the ADAT 1 TOS cable. Actually on occasions it has worked, so that does point to a poor connection ...