PlanetZ forums - scopeusers.com

Yes!!!!!! but noooooooon!!!!!!! I finally decided to force the connectors which are all in place except the adatA in of the a16 which I can't lock. So now 96, 48, 44.1 and 32khz scope in master the a16 on adat, large discontinuous parasites red indicator on the samplerate setting adatA fixed, the ad...

the joy of the second hand, anyway, thank you for your time

same results, the cables are new, the pulsar and the a16 bought second-hand, I found that the cable once locked is difficult to disconnect maybe that the plugs are worn.

Besides, I'm a little afraid to force the connections.

I have the red marking in samplerate on zlink when I plug it in. I think I found out where the problem came from, this is the first time I've used adat cables so I just connected them I just noticed on the A16 that I can push the cable connector a little more until I hear a click! I only get there o...

red led on the adat selection of the a16

green led on the a16 master and 96khz

So it seems that the a16 I bought has a problem

Neither of them is marked in red

No change in 48 khz for connectors, adatA and B optical signal on the Pulsar outputs, at the end of the cable on the adatA and B input of the a16 optical signal. Optical signal on the output of the a16 adatA and B, at the end of the cable on the input of the card its optical signal. The connectivity...

I can only select the samplerate on the a16 when it is in master (96khz)
On the scope I am also in 96khz

The presonus is just connected by audio to the inputs of the a16 so it can't be master I have the 4 adat in and out connected from the card to the a16 So if the scope is in slave and the A16 in master. the master led of the a16 is in green and I can select the samplerate, but in reaper "the sco...

I'm starting to understand my mistake, the a16 ultra becomes master, so I have to put the system in slave in the samplerate setting of the scope.
is that right?

I thought that adat et spdif was the same thing?
I use sssnake optical cables Toslink/Toslink plugs

what do you mean by master clock?

Indeed the project for the Luna 24/96 was fully connected to the stm 1632, it is similar to the last project in screenshot. My Luna 24/96 project had 8 asio in and 8 asio out + the zlink when I installed the a16 ultra being convinced that I needed as much asio in as I needed asio out with the 16 cha...

Yes everything is well adjusted, driver asio, asio in....
I don't even have a signal on the scope interface
Everything worked perfectly with the Luna 24/96, that's why I don't understand what can go wrong

the console

The a16 ultra

So I just modified my scope project, but the result remains the same.
As in the pictures, the signal arrives well at the console and it sends back well to the A16 ultra

I just want my 16 Adat inputs to be active in my Daw.
I understand from what you say that I should connect the adat a and b source to the STM 2448 so that they are directly connected to the asio dest.

Hello. Having recently a Creamware A16 ultra that I connected to my Pulsar 2 coupled to a Luna. So I have 16 inputs connected to my Presonus studio live console 16.4.2 Ai, the 16 outputs are connected to the A16 ultra which is connected to it in Spdif on the Pulsar 2. Each input sends the signal wel...