Page 1 of 1
fx hardware esterno
Posted: Wed Sep 03, 2008 9:48 am
by nunziata
How do i connect the fx hardware module in the routing project ?
lexicon pcm 91
tc 2000 electronics
tube tech cla 2 compressor
Is it possible to make these connections using the aux mixer.
tank you
Re: fx hardware esterno
Posted: Thu Sep 04, 2008 1:56 am
by Fede
the external effects modules can be assigned to i/o present in your project (sw: asio, wave.., hd: adat, spdif, analog), you do this by opening the ext-fx module's surface and choosing the i/o you need.
Ciao
Fede
Re: fx hardware esterno
Posted: Wed Sep 10, 2008 12:32 am
by dawman
AES/EBU of the PCM91 shows up as SP/DIF as the selection though. Confusing, but none the less true.
BTW, some nice weapons ya' got there Brotha' Man.
Re: fx hardware esterno
Posted: Wed Sep 10, 2008 4:11 am
by nunziata
but i connect
lexicon pcm 91
tc 2000 electronics
tube tech cla 2 compressor and if possible
2 drawner noise gate 201.
this is problem.........
send me a project for understand better.
thank
Re: fx hardware esterno
Posted: Wed Sep 10, 2008 6:34 am
by dawman
Effects / Others / External Effect........................Assign I/O's.
Use as an insert into the AUX of a mixer.
______________________________________________________________________________
Option 2 /
Effects / Others / External Effect S. Directly send a synth into the Inputs, Outputs to Mixer.
______________________________________________________________________________
Option 3 /
Effects / Others / External Effect S / Attach to the Returns and Sends of a STM1632.
______________________________________________________________________________
Re: fx hardware esterno
Posted: Wed Sep 10, 2008 10:47 am
by nunziata
But project noooooooo |||||||||
send me a project
is better
thank you
Re: fx hardware esterno
Posted: Wed Sep 10, 2008 12:25 pm
by dawman
Effetti / altri / effetto esterno S........................Assegni I/O.
Usi come un inserto nell'AUX di un mescolatore.
_________________________________________________________
Scelta 2 /
gli Effetti / Altri / Effetto Esterno S. Direttamente spedisca un synth nei Contributi, Produzioni a Mescolatore.
_________________________________________________________
Scelta 3 /
gli effetti / altri / effetto esterno S / leghi al ritorna e spedisce di un STM1632.
_________________________________________________________
Io ho attualmente nessuna ferramenta o il progetto per mostrarLa. Lei avrà leggere il manuale e sperimentare con le scelte su.
Ciao.
Re: fx hardware esterno
Posted: Wed Sep 10, 2008 9:28 pm
by nunziata
grazie comunque .................. ciao
Re: fx hardware esterno
Posted: Thu Sep 11, 2008 3:58 am
by dawman
I suoni di PCM91 bello in Scopo, una decisione più saggia.
Re: fx hardware esterno
Posted: Fri Sep 12, 2008 10:01 pm
by t_tangent
Capiche ?
Re: fx hardware esterno
Posted: Sat Sep 13, 2008 5:36 am
by dawman
My Great Uncle Ninzio Cucuru ( R.I.P. ) came to me in a vision, and said you must help Nunziata, as we both have troubles expalaining ourselves.
I sold my hardware effects and can't create a jpeg. until I find a suitable replacement for the PCM91. There's only one choice......The Bricasti Model 7. The problem is that I am far from wealthy, and must get a second XITE-1 first, as the XITE-1's generate income. The Bricasti M7 is a luxury that must wait for a couple of months. It's the same cost as an XITE-1.
I shall proudly display it on New Years Eve. ...................
voui joke? ' Who is your uncle?
Posted: Sat Sep 13, 2008 5:43 am
by nunziata
no problem if what you say it shows with photos
maybe Project
thank you
Re: fx hardware esterno
Posted: Mon Feb 08, 2010 2:56 am
by nunziata
Attualmente questo è il progetto, ma non sono felice con il suono ricevo, credo che con il Cubase ASIO per sfruttare l'hardware esterno non è la scelta giusta. Per non parlare di utilizzare il convertitore di 16 macchine ultra tech, come tubi e UAD 2-610, forse dovrei collegare direttamente ai microfoni e poi andare in convertitore 16 ultra .. sarebbe meglio così
cosa ne pensi?
the sound you get is not...
Re: fx hardware esterno
Posted: Mon Feb 08, 2010 6:20 am
by nunziata
this is workflow cable studio
Re: fx hardware esternal
Posted: Mon Feb 08, 2010 12:10 pm
by nunziata
This is currently the project, but are not happy with the sound I get, I believe that with the Cubase ASIO to exploit the external hardware is not the right choice. To say nothing of using the converter 16 ultra tech machines, such as pipes and UAD 2-610, maybe I should connect directly to the microphones and then go to converter 16 ultra .. would be better that way
What do you think?