Posted: Tue Sep 24, 2002 7:36 pm
Hey People,
Now i am relatively new to the realm of all this but i have quite a problem and haven't be able to get any help for it.
Ok, my setup is, an 03d using adat to connect to my pulsar 2 card and there is a adat connection back to the 03d. I have winXP and STP 3.01 and am recording in SX on a 1.8ghz P4.
My problem is i cannot record more than two tracks of audio. And even when i record any audio in SX, it jitters and jolts and has the occasional digi click. However, in wavelab 4, i can record fine, but i guess that is only one channel. Ok, so i have to have the 03d set as master an the pulsar as slave when recording, if i have the pulsar as master i just get heaps an heaps of digital clicks.
In SX, i can only select channel 1 in/out play/record and channel 2 in/out play/record. If i select all 8 channels for input and output i get this message.
"If this card is currently configured to accept a digital signal, and no digital signal is present, please either reconfigure the card to use an "internal" clock, or apply a digital signal, or if possible switch this port to accept an analog input."
Now this hasn't just happened in SX, it has happen in Cakewalk 8 too, and thats the only other program i've really tried.
I just don't know what i'm doing wrong. Also in SX, if i set the asio to SCOPE ASIO, no digital audio comes through at all, so i have to use the SX ASIO or what ever it is called. Is there a specific asio the pulsar has to be in?
Anyways, hopefully you smart people can tell me what i'm doing wrong, cause i sure as hell don't know.
Thanks for your time.
Now i am relatively new to the realm of all this but i have quite a problem and haven't be able to get any help for it.
Ok, my setup is, an 03d using adat to connect to my pulsar 2 card and there is a adat connection back to the 03d. I have winXP and STP 3.01 and am recording in SX on a 1.8ghz P4.
My problem is i cannot record more than two tracks of audio. And even when i record any audio in SX, it jitters and jolts and has the occasional digi click. However, in wavelab 4, i can record fine, but i guess that is only one channel. Ok, so i have to have the 03d set as master an the pulsar as slave when recording, if i have the pulsar as master i just get heaps an heaps of digital clicks.
In SX, i can only select channel 1 in/out play/record and channel 2 in/out play/record. If i select all 8 channels for input and output i get this message.
"If this card is currently configured to accept a digital signal, and no digital signal is present, please either reconfigure the card to use an "internal" clock, or apply a digital signal, or if possible switch this port to accept an analog input."
Now this hasn't just happened in SX, it has happen in Cakewalk 8 too, and thats the only other program i've really tried.
I just don't know what i'm doing wrong. Also in SX, if i set the asio to SCOPE ASIO, no digital audio comes through at all, so i have to use the SX ASIO or what ever it is called. Is there a specific asio the pulsar has to be in?
Anyways, hopefully you smart people can tell me what i'm doing wrong, cause i sure as hell don't know.
Thanks for your time.