Page 1 of 1
Posted: Mon Jul 22, 2002 10:08 am
by es1276
Can anyone give me a recommendation how to expand my Pulsar II Classic to 10 analog I/Os ?
How do I connect a Luna 24/96 I/O box or a A16 Ultra to my Pulsar II Classic ?
Thanks for your advise.
Posted: Mon Jul 22, 2002 10:23 am
by at0m
2 options:
-you could swap IO board, and get a Z-Link IO board. Z-Link will allow you to connect 2 Luna2496 or one A16-Ultra. It's the same IO board as the Classic, but on ADAT IO side is changed to 2 Z-Link IO's.
-you could get an A8/A16 or third party ADAT converter, and connect it to your Classic ADAT IO's.
Posted: Wed Jul 31, 2002 5:59 am
by ervilha
Comparing prices adding a Luna II with Luna Analog Breakout box seems to be an alternative worth considering... Esp. with the current special offer for the combination including the Optimaster plugin.
Posted: Wed Jul 31, 2002 10:39 am
by brain1
you could use the adat i/o on the A-16 and connect it to the adat i/o on the Pulsar II classic- this would give you 16 more inputs- you really only need z-link i/o plate if you want to do 24/96 with the A-16
Posted: Wed Jul 31, 2002 11:35 am
by mano
I connect an A16 Ultra to mine, using 4 ADAT Lightpipe cables. I can only work with half of the channels if I want 96Khz, but again, I work in 44,1Khz most of the time, and the 16 I/Os are available and work fine.