Page 1 of 1
Posted: Sat Jul 20, 2002 7:44 am
by Grok
I've tried and got the message "DSP overload-big modules don't fit"
Even if I have only the Minimax, a MIDI output and an audio output in the project, with aproximatively 1/6 of my 11 DSP charged at 48kHz, I receive this message when I switch to 96kHz.
Anyone has tried too?
Posted: Sat Jul 20, 2002 8:02 pm
by Neutron
It sounds like they might have used "same DSP" loading on some of the internal modules to prevent phase problems, so it tries to load a large module onto a single dsp.
just a guess though.
Posted: Sun Jul 21, 2002 1:28 pm
by Chrisznix
I´ve experienced another one quite like this one in 96kHz - I just have to use 2 MasterVerb Pro and an Optimaster at one time, and i´ll get an DSP communication error or so. Seems like the DSP-timing on 96kHz is a bit hard to organize...
Posted: Sun Jul 21, 2002 7:31 pm
by Grok
Samplerate is one weakness in SFP 3.1a; presets of synths and FX aren't well calculated a each frequencies.
Hope SFP 3.1b will solve this.
For the Minimax, I'm sure now it's another bug related to samplerate: I spoke with an user that has 2 Scope cards 30 DSP, he got the same problem with the Minimax, but beginning at 48kHz.
Posted: Sun Jul 21, 2002 7:55 pm
by Grok
My question is: are the guys at Creamware only working at 44,1kHz?
Posted: Mon Jul 22, 2002 1:54 pm
by Chrisznix
Hi Grok!
Hmm, that´s not too nice... i would like to use that 96kHz-feature actually...
I wonder if any other user can confirm that a bit more complex setup WORKS at 96 or 48kHz!? Is there a workaround?
BTW, i´ve got myself a good lawyer (friend of mine) that tries to kick CW a little bit - maybe that helps them for a little motivation!
We´ve got certificates with two different Scope-Systems and two different Serviceshops that certified me that some of CW´s features used in their specs aren´t fully avaible for a long enough time, so the odds for me look pretty good - this one-month-no-local-support thingy will do the rest.
Posted: Mon Jul 22, 2002 4:12 pm
by Grok
Hi Griznik
In my experience, 96kHz works fine with Pulsar 3.01.
In SFP3.1a, there is this little bug related to samplerate, LFOs frequencies changes with the samplerate so a synth preset or an FX preset is not the same at each samplerate.
We'll soon see what's going on with SFP3.1b
Posted: Mon Jul 22, 2002 4:13 pm
by Grok
apologizes for the mispelling