Page 1 of 1
Can I use a io plate for luna adat 2x and a booster card
Posted: Sun Oct 16, 2016 2:51 am
by Marco
Can I use a io plate for luna adat 2x and a z link connector with a 15 dsp booster card?
Re: Can I use a io plate for luna adat 2x and a booster card
Posted: Sun Oct 16, 2016 3:17 am
by Marco
This io plate was often sold with the luna card. Slim Design with 2x adat in out and z link 1x
Re: Can I use a io plate for luna adat 2x and a booster card
Posted: Sun Oct 16, 2016 8:30 am
by garyb
no. it only works with the 3 dsp card.
Re: Can I use a io plate for luna adat 2x and a booster card
Posted: Sun Oct 16, 2016 9:29 am
by Marco
Thx gary
Re: Can I use a io plate for luna adat 2x and a booster card
Posted: Fri Dec 16, 2016 2:36 am
by fraz
anabella wrote:Can I use a io plate for luna adat 2x and a z link connector with a 15 dsp booster card?
Are you going to get already got Power Sampler/Scope Home/3 DSP card?
This will be good with DSP card as well and ADAT expansion plate with booster card and 2 Luna II boxes, 16 I/O Luna II and 16 I/O with ADAT!
Re: Can I use a io plate for luna adat 2x and a booster card
Posted: Sun Dec 25, 2016 5:34 am
by Marco
I don't have a Luna card, but I would like to have a adat audio connection for the Booster card. But nowhere to buy
Re: Can I use a io plate for luna adat 2x and a booster card
Posted: Sat Dec 31, 2016 8:58 am
by fraz
anabella wrote:I don't have a Luna card, but I would like to have a adat audio connection for the Booster card. But nowhere to buy
If you look on EBay then you should be able to get a Power Sampler / Luna II 3 DSP card and maybe an ADAT expansion card to go onto Luna II / Power Sampler
There still maybe Luna II I/O boxes available - I got two in the last two years!!!
I also got a 14 15 DSP expansion card!
It's a hassle to find!
Ebay.com
Anyone who lists any Creamware Sonic Core send a PM to the seller to ask specifically what they've got!
Shopping list???
3 DSP card
ADAT expansion card (connects to 3 DSP card)
Ferrofish A16 AE (ADAT edition) for ADAT expansion card
Luna II box x 1 or x2 (Z-link ADAT expansion card & 3 DSP card)
Floppy disk power connector (for 2nd Luna 2 box)-connects to PSU from ADAT expansion or 3 DSP card! - If you have modular PSU you'll already have one!
IDC 10 pin ( not easy to find but I got one or two) and even bought one that was the wrong size too because it can be confusing to see the size in the picture
But it is a hassle to get it all together and Luna II boxes 200 euros!!!