Page 1 of 1

Scope mixer question

Posted: Thu Sep 10, 2009 2:55 am
by pkole
Is there a 32 channel scope mixer that has at least 4-6 inserts and auxilaries and direct outs for all channels?
I am trying to mix OTB but also like to have scope effects and flexibility.
I have scope 4.5v.
Thanks in advance.
Panagiotis.

Re: Scope mixer question

Posted: Thu Sep 10, 2009 4:55 pm
by t_tangent
Hi there,

I expect having scope 4.5 you already have the STM 2448 Mixer. There is also a bigger brother the STM 4896, but cant remember if that comes standard with Scope 4.5 as well.
Anyway STM 4896 would certainly be similar to what you are looking for.

Also there are a couple of third party developers that build some really cool mixers that are definately worth looking at, and they might even be able to build you a custom mixer for the right price I think

http://www.spacef-devices.com

has several different types of mixer available, and if one runs out of channels there is a special connection to add another mixer to the first one so that might appeal.

http://wolf-audio.com

also has a 16 and 32 channel mixer bundle that has most of the features you mentioned.

Hope that helps

Cheers

t_t

Re: Scope mixer question

Posted: Thu Sep 10, 2009 5:32 pm
by netguyjoel
For sure...4896 from S|C is the first choice...but, I will agree...check out space-f and wolf mixers too...very serious stuff there! :wink:

Re: Scope mixer question

Posted: Fri Sep 11, 2009 2:55 am
by pkole
Thanks a lot for your replies.
STM 2428 and 4896 are great mixers.
However, they don't have direct outputs on each channel.
The STM 1632 that has direct outputs, has only 2 inserts per track.
Also wolf mixers or spacef don't have direct outputs either.
Correct me if i am wrong.
Any other suggestions are welcome.

Re: Scope mixer question

Posted: Fri Sep 11, 2009 3:21 am
by Fluxpod
There is a button that gives those mixers direct outs.I cant recall where it is right now but i am pretty sure its in the master section on the left side somewhere. :)

Re: Scope mixer question

Posted: Fri Sep 11, 2009 3:40 am
by pkole
I am going to check this out immediately.
If this works, 4896 will definetely be my choice.

Re: Scope mixer question

Posted: Fri Sep 11, 2009 4:53 am
by pkole
Well i think Fluxpod is right.
2448 and 4896 have direct outputs.
You just have to go to the master section, on the left-down side and click options.
There it has the direct out activation button.
Definetely solved me a lot of problems.
Fluxpod and others, thanks for the help.

Re: Scope mixer question

Posted: Sat Sep 12, 2009 10:04 am
by ARCADIOS
smt4896 and stm2448 as well have.


go to "options" and press the "directouts" button

Re: Scope mixer question

Posted: Thu Sep 17, 2009 1:55 am
by Funky r
here it is : http://wolf-audio.com/wad/devices/Entri ... Mixer.html
A great mixer with automation, 6 insert inclued one for modular, 4 busses and 4 aux. It has been delivered with spectrum analyser, peakmeter. :D
Try it.

Re: Scope mixer question

Posted: Thu Sep 17, 2009 3:38 am
by pollux
Funky r wrote:here it is : http://wolf-audio.com/wad/devices/Entri ... Mixer.html
A great mixer with automation, 6 insert inclued one for modular, 4 busses and 4 aux. It has been delivered with spectrum analyser, peakmeter. :D
Try it.
doesn't have direct outs.