PlanetZ forums - scopeusers.com

Hi, guys I installed Scope 5.0 and its running all good, except for the following plugin which I miss:
Protone
SPL Transient Designer
SPL Attacker
Interpole


Where can I find the installs?

thx

Hhhmm... i have Interpole on my install, but proTone is definitely missing (although i have the keys). Check Effect/Stereo/Filter again to see if Interpole is there. i don't see a key for Transient Designer even though i own it.

The No Keys versions are here:
ftp://sonic-core.net/software/SCOPE_Family/nokeys_OXE/

Yep true but i don't see place for OXE in scope 5. Copy/paste of SPL from old SFP (and every file needed) seems to work here

mpodrug wrote:Yep true but i don't see place for OXE in scope 5. Copy/paste of SPL from old SFP (and every file needed) seems to work here

That's all i do - except TD doesn't work - no keys, and the key for proTone doesn't work for Pro One.

I posted the same question in another spot - where do the OXE files go? I have a number of 3rd-party plug-ins. There used to be a special subdirectory where you would place the OXE files and then Scope would load them upon startup. Don't see that here now.

Copy *.dev from old SFP. Try to run. If device ask for a specific DSP file(or more of them) just copy that also from old SFP - DSP folder to your new Scope 5 DSP folder, close new Scope5, run again and it will work fine

Or just run the 'oxe' files that you need to have installed while Scope 5 is running...

valis wrote:Or just run the 'oxe' files that you need to have installed while Scope 5 is running...

How?

I don't have Scope5 (need to purchase the license--no 4.5 here) but with 3.x & 4.x it should create the file association for you I think? Let me look and see what it is here..."Opens With: PluginInstaller.exe"

C:\Scope\App\Bin\PluginInstaller.exe is the location of that binary on my Scope 4.x install, check & see if it exists in Scope 5 and look in folder options and see if that file association exists.

With Scope 5 running try double clicking an .oxe installer and see what happens...

Hi, i can load the transient designer, but i didn´t find the dsp files in the 4.5 directory. the same is with the attacker.

protone is not working at all, if I load the old one the registration dialog is popping up. after registering it says "import succeed" but scope 5 gives me a "loading error: could not load file: c:/programme/scope pci/devices/synths/protone.dev"

i also tried to install from the oxe but all oxe setups are not startable. a dialog pops and says: "access denied"

any help? can somebody provide me with the .dev and .dsp files for protone, transient designer and attacker?

if it´s not working i have to go bacok to 4.5. i use the protone a lot in projects cause it´s so superior!

if you look in your new .rgy file with a text editor
you can find SC Protone, SC interpole and SC Sampler
i only have Attacker, so there is only SPL Attacker here

But everything is allready here if you had these plugs before Scope 5

Perhaps should we wait for the final release or an update

there is no STS2000/STS3000/STS5000 etc ... like before but only a line with SC Samplers

i can't test Scope 5 because i m not at home
i'll be back Monday

SPL Transient designer is working in V5 - you have to copy everything manually from v4.5 folder (dsp files). Interpole is also working just fine in v5.

I did it and it is working. I am looking to find solution for protone.

mpodrug wrote:SPL Transient designer is working in V5 - you have to copy everything manually from v4.5 folder (dsp files). Interpole is also working just fine in v5.

I did it and it is working. I am looking to find solution for protone.

I'm able to use Transient Designer aswell. Works fine here.

Update: i sent Ralf my Scope.rgy rather than allkeys file and i got TD keys generated - i copied TD device from 4.5. Unfortunately i can't do the same with proTone as the version i have is Pro One, the key is for proTone. S|C need to just have this in the install or as a separate download and it'll work.

Mr Arkadin wrote:Update: i sent Ralf my Scope.rgy rather than allkeys file and i got TD keys generated - i copied TD device from 4.5. Unfortunately i can't do the same with proTone as the version i have is Pro One, the key is for proTone. S|C need to just have this in the install or as a separate download and it'll work.

Is it the Pro One that Creamware sold before the first insolvency, or one of my Zarg Music ones?
If it's the former, then the devices are basically the same with a name change, as far as I know. (Of course, if it's one of mine, then you need a different key).
-john b.

johnbowen wrote:Is it the Pro One that Creamware sold before the first insolvency, or one of my Zarg Music ones?
If it's the former, then the devices are basically the same with a name change, as far as I know. (Of course, if it's one of mine, then you need a different key).
-john b.

As it happens i have yours as well (Solo version) and Prophet Standard and i seem to have keys for those. i just found and .oxe for proTone so will try and generate a device in 4.5 and copy it to 5.0 - or can i literally just rename my Sonic|Core Pro One.dev to proTone.dev and it will work?

i can't try any of this out at the moment as my hard disc has crashed and i haven't got time to get it fixed for a while (this is posted from an internet cafe).

Ah, the Solo Pro One and the Prophet Standard - wow, that's going a long way back!
I don't know about your Pro One/ProTone issues. The 2 devices probably have different encryption modules inside, and so would need different keys generated. Best thing is to send Ralf Bach your Scope.rgy file, as you did.
-john b.