Page 1 of 1
is it possible to put a plate on a srb??
Posted: Mon May 26, 2008 5:57 am
by the19thbear
lets say i have a 6dsp srb
can you put a ..whatever.. plate on that??
anybody tried?
thanks!
Posted: Mon May 26, 2008 7:02 am
by bill3107
yes you can ... as you can remove a plate and put another one. Actually an srb or xtc board (with no plate) does not contain (initially) any softaxre or plugins. Buuuuuut, when buying a plug you can ask Soniccore to "attach" this new plug to this new board. Everything is possible.... except asking your srb running as fast as an Xite
...
Jo
Posted: Mon May 26, 2008 7:02 am
by kylie
my first card was a Pulsar XTC (which is kinda SRB).
I already put several I/O plates on it, so I expect it to work fine for you.
be sure to receive the distance bolts and plastic screws from whoever you get your I/O plate from.
-greetings, markus-
Posted: Mon May 26, 2008 9:09 am
by RP_001
It might be worth mentioning to be very gentle putting the screws in place, they are very fragile. I broke one a couple of weeks ago changing plates. That might be a little annoying when you ever want to replace it with another board again.
RP
Posted: Mon May 26, 2008 9:12 am
by RP_001
It might be worth mentioning to be very gentle putting the screws in place, they are very fragile. I broke one a couple of weeks ago changing plates. That might be a little annoying when you ever want to replace it with another board again.
RP
Posted: Mon May 26, 2008 10:27 pm
by kylie
a scope dsp card
always deserves gentle operation...
but fun aside, the screws are made of plastics, so you should care indeed. it is, nevertheless, possible to get some spares.
-greetings, markus-