Page 1 of 1
Drive Delay bundle UPDATED March4-08
Posted: Wed Feb 13, 2008 10:25 am
by Jah Servant
Ok, I know you may have enough delays, but another one won't hurt.
Here is the mono version, stereo version and XL, which is stereo with control over each side with the option to link any control to the opposite side. This one could also be used as 2 mono delays in one gui.
Gotta thank Shroomz for the knobs.
bless,
Mark
Updated, fixed preset panel name
Feb 21/08 presets should save now
March 4/08 added dry/wet control for proper insert use, that should be it now
Posted: Wed Feb 13, 2008 1:08 pm
by Jah Servant
the drive is a distortion module, so it will give a different flavor if you use that to push the feedback, you just have to watch your overall level with it, if you are controlling it with midi you can just bring down the level as necessary.
Posted: Wed Feb 13, 2008 3:56 pm
by dawman
Thanks, I shall try this considerate gifr tonight.
JV
Posted: Wed Feb 13, 2008 5:36 pm
by Mr Arkadin
If i could just suggest one thing (don't wish to appear ungrateful), but if these are the final devices then would it be possible to have the presets page save with the name - currently it says Empty Effect?
Posted: Thu Feb 14, 2008 9:20 am
by Jah Servant
I will check on the presets thing, these are really my first devices, so I'll try to find out how to fix this.
Posted: Fri Feb 15, 2008 6:59 am
by bizarre
Thanks
Posted: Fri Feb 15, 2008 9:13 am
by faxinadu
many thanks
Re: Drive Delay bundle
Posted: Wed Feb 20, 2008 6:55 pm
by Shroomz~>
Jah Servant, congrats on your first sdk devices.
I also need to say that I very much appreciate being given credit for the knobs/pots since I invest a lot of time in making them. Guess it's only a matter of time before someone takes the credit for them somehow, but I'm glad to see so many of you using them anyway.
regards,
Shroomz
Jah Servant wrote:Gotta thank Shroomz for the knobs.
Posted: Wed Feb 20, 2008 8:42 pm
by hifiboom
jeah Shroomz, I know that it must have been much work.
And I appreciate your work for this platform. At least now devs have the possibility to create nice looking front ends for their plug-ins.
thanks again.
BTW how much time do you need for one element? lets say a poti?
best regards.
Posted: Thu Feb 21, 2008 7:38 am
by Jah Servant
Ok, presets should save now, let me know if there are any problems.
Shroomz, I really appreciate you sharing your knob designs, it makes a big difference to my stock looking gui's.
Posted: Sat Feb 23, 2008 6:27 am
by Shroomz~>
hifiboom wrote:BTW how much time do you need for one element? lets say a poti?
I've got 3D animation render times down to a couple of minutes tops for just 320x240 size frames, so probably about 30mins total for something very simple like 3D animations of 2D shapes which don't have any modelling & anything up to 1 or 2 days work for more complex shape modelling like ribbed pots with aluminium, custom applied caps etc. Mostly not more than 1 day though.
Sorry for the OT blurb.
