Page 1 of 1
ACK TIMEOUT
Posted: Fri Jan 25, 2008 5:21 am
by ingo
Who can me help?
when i started my noah the display shows the normaly "LOADING PERFORMANCE" followed from the message "ACK TIMEOUT".
and now the NOAH is normaly working but he has no sound.
What can i do??
best regards Ingo
Posted: Fri Jan 25, 2008 6:53 am
by alfonso
Not sure it would do so, but is the digital clock set correctly? Master or receiving it if slave?
Posted: Sun Jan 27, 2008 11:16 pm
by ingo
I have found the error. it was a bad connection on the EX board.
I take a look on the EX board and i see a cold soldering on the connector.
l have resolder the connector on the EX board and now......NOAH is repaired.
brg INGO
Posted: Mon Jan 28, 2008 6:50 am
by Gordon Gekko
Re: ACK TIMEOUT
Posted: Sat Oct 31, 2009 3:44 pm
by reinhard
Hello Ingo,
many many thanks for your decription of the fix of the EX board. I had exactly the same Noah failure today. I unscrewd my Noah and first removed the EX board to check whether the Noah would run ok at least in 2-Slot-Mode without the EX board. And it did. Encouraged of this and of your soldering description I heated up my dusty soldering iron and I also resoldered (just heated up) all the EX board connectors. And .... It worked...
So this action saved my Noah, I like it much because of its outstanding sound. Thanks to Ingo.
Re: ACK TIMEOUT
Posted: Tue Nov 10, 2009 5:41 am
by bill3107
what a nice thread ! I have experienced some problems and i have no sound since last week and ... i have this same message "ACK TIMEOUT" and thought it was normal. Initially i thought it was because of the ADAT but i will have a look inside... I really hope it will work. I really love my Noah EX !!!!
Re: ACK TIMEOUT
Posted: Tue Nov 10, 2009 8:32 am
by wayne
I'm keeping tabs on this thread also - Noah fanboy here
