VM-1242 .. no longer available
Posted: Mon Feb 19, 2007 3:33 pm
no longer available
PlanetZ forums - scopeusers.com
Scope Users Community
https://forums.scopeusers.com/
VM-1242 .. no longer available
Page 1 of 9
Posted: Mon Feb 19, 2007 3:56 pm
fantastic Shroomz, my respect
Posted: Mon Feb 19, 2007 4:13 pm
wow Shroomz,
what a hell of a mixer...
simply great, just checked it and it works fine so far...
some feedback from my side:
- solo/mute both mute the channel
- I can route to the group busses but the sound is still routed to the main channel ( so it gets doubled/phaser)
suggestions:
- on/off switches for the EQs to save DSP ressources
(eats up a whole Pulsar Project ( 6xDSP)
Wooow.....
what a hell of a mixer...
simply great, just checked it and it works fine so far...
some feedback from my side:
- solo/mute both mute the channel
- I can route to the group busses but the sound is still routed to the main channel ( so it gets doubled/phaser)
suggestions:
- on/off switches for the EQs to save DSP ressources
(eats up a whole Pulsar Project ( 6xDSP)
Wooow.....
Posted: Mon Feb 19, 2007 5:10 pm
Hello,
Yes, it's quite dsp intensive if you don't have a 14/15 dsp board as your primary card, so I might look into that
On that subject, you'll need a minimum of 2 x 4dsp cards to run this mixer.
cheers,
Shroomz
mmm, that shouldn't happen, I'll look intio it.hifiboom wrote: - solo/mute both mute the channel
The buttons at the bottom beneath the faders (with the green text) switch the channels, aux's & busses on & off the mix.- I can route to the group busses but the sound is still routed to the main channel ( so it gets doubled/phaser)
suggestions:
- on/off switches for the EQs to save DSP ressources
(eats up a whole Pulsar Project ( 6xDSP)
Yes, it's quite dsp intensive if you don't have a 14/15 dsp board as your primary card, so I might look into that
On that subject, you'll need a minimum of 2 x 4dsp cards to run this mixer.
cheers,
Shroomz
Posted: Mon Feb 19, 2007 5:44 pm
edit- Just deleting the odd double post bug/behaviour.
Posted: Mon Feb 19, 2007 8:19 pm
Wow 
.. So you mean I can run it on my two pulsars?
.. So you mean I can run it on my two pulsars?Posted: Mon Feb 19, 2007 11:16 pm
Won't load on my Scope Pro 
- cannot add module Mixer Master Gain
- cannot add module Mixer Master Gain
Posted: Tue Feb 20, 2007 2:09 am
voidar .... yes you can run it on 2 Pulsars (in theory at least)
Wayne, that version won't run on a single board as it's assigned over 2 boards, but I'm gonna make a version which is assigned to one board which will require a big card & also a version which isn't dsp locked AT ALL. I'll post them today
Wayne, that version won't run on a single board as it's assigned over 2 boards, but I'm gonna make a version which is assigned to one board which will require a big card & also a version which isn't dsp locked AT ALL. I'll post them today
Posted: Tue Feb 20, 2007 3:13 am
Added 2 new versions to the first post which have different dsp managment. Try the 'board0' version Wayne !! 
Posted: Tue Feb 20, 2007 4:50 am
The board 0 version has just been updated. For some strange reason it's dsp distribution worked in the sdk but not in Scope. If you downloaded the board 0 version please d/load it again.
Posted: Tue Feb 20, 2007 7:36 am
Wow, impressive!!! At least the design looks great! I'll check it tonight.
Thanks Shroomz!
Thanks Shroomz!
Posted: Tue Feb 20, 2007 8:31 am
Shroomz Your'e Killing Me,
I am far away from my DAWg's but have downloaded this to my wireless HDD. If it just sounds as good as it looks, I will be rejoicing. This is great as I have time to play w/ this for 2 weeks b4 my next gig. Awesome !!
I am far away from my DAWg's but have downloaded this to my wireless HDD. If it just sounds as good as it looks, I will be rejoicing. This is great as I have time to play w/ this for 2 weeks b4 my next gig. Awesome !!
Posted: Tue Feb 20, 2007 1:39 pm
I'd like this as well, both for dsp saving and just to eliminate unnecessary circuitry when it's not needed. Bonus points for doing the hi/lo shelves & mid bands independantly switchable.Shroomz wrote:suggestions:
- on/off switches for the EQs to save DSP ressources
(eats up a whole Pulsar Project ( 6xDSP)
Yes, it's quite dsp intensive if you don't have a 14/15 dsp board as your primary card, so I might look into that
Posted: Tue Feb 20, 2007 3:37 pm
WHAT IS THIS !!!
Thank you very very much
(no writen words can express THAT sound)
Thank you very very much
(no writen words can express THAT sound)
Posted: Tue Feb 20, 2007 4:59 pm
Shroomz,..My Brotha' Man Shroomz,
I love the sound and have hardly begun to scratch upon this surface. Do you suggest running Move EQ w/ this, I see it is pictured. I'm still messing this mixer since I got home. I downloaded it in Tahoe just in case the PlanetZ server started acted like Creamwares or something, Oh Sorry.
I found that it freezes my synthesizers polyphony when I zero out the Polyphony on yours. So I suppose I should give your mixer 1 voice of Poly, as that seemed to fix it. Does raising the Poly on the mixer allow more plugs or anything?
This mixer is awesome. Kudo's on the EQ arrangement, as I can do vocals, synths, and about anything you throw @ it, Extremely versatile. This mixer w/ Move EQ is worth buying a Creamware Professional card to run it. I can't believe the balls on the samples I love so much. John Bowen should hear his synths through this FAT BASTARD.
May You Be Molested, By Large Breasted Babes,
I love the sound and have hardly begun to scratch upon this surface. Do you suggest running Move EQ w/ this, I see it is pictured. I'm still messing this mixer since I got home. I downloaded it in Tahoe just in case the PlanetZ server started acted like Creamwares or something, Oh Sorry.
I found that it freezes my synthesizers polyphony when I zero out the Polyphony on yours. So I suppose I should give your mixer 1 voice of Poly, as that seemed to fix it. Does raising the Poly on the mixer allow more plugs or anything?
This mixer is awesome. Kudo's on the EQ arrangement, as I can do vocals, synths, and about anything you throw @ it, Extremely versatile. This mixer w/ Move EQ is worth buying a Creamware Professional card to run it. I can't believe the balls on the samples I love so much. John Bowen should hear his synths through this FAT BASTARD.
May You Be Molested, By Large Breasted Babes,
Posted: Tue Feb 20, 2007 6:45 pm
Sounds fantastic, very musical. Thanks Shroomz & Sharc!
Posted: Tue Feb 20, 2007 9:31 pm
How about an on/off switch on the EQ Shroomz? That would save a lot of DSP...
Great work! Thanks!
Great work! Thanks!
Posted: Tue Feb 20, 2007 9:34 pm
Oops, hifiboom already pointed that, sorry...
Posted: Wed Feb 21, 2007 4:48 am
Thank you Shroomz very much for the device!
I 've just downloaded it and I am going to try it... I have another request..
..Is it possible to release these versions with a GUI that fits into 1024*768? ... Or am I the only one who still works with that resolution? 
I 've just downloaded it and I am going to try it... I have another request..
..Is it possible to release these versions with a GUI that fits into 1024*768? ... Or am I the only one who still works with that resolution? Posted: Wed Feb 21, 2007 6:28 am
i agree with rodos. Even though i have higher resolution than him it's still huge on my display - i can just fit it in if i drag it over a bit, but it's a squeeze with the Live Bar open.