PlanetZ forums - scopeusers.com

hi y'all
after beeing away for a couple of months
finaly back on-line.
I'm in a new location and slowly building my studio.

the first time I wanted to start my daw again
I get this error messages

installation error
"Hardware version 30 detected. This hardware requires
a software update. Please consult the installation quide.
OK>

cannot start SCOPE platform
! Could not gain access to the Creamware hardware

so I thought I make a fresh windows installation

and now I get this messages when I want to install scope 4.5

anybody seen this?? an know what to do?


regards
Kor

I got the same messages a week ago when I upgraded from an old ASUS P4T-E to an other old ASUS P4B533 motherboard.
Then I put the creamware cards in another PCI slot and these messages were gone. Probably you have an IRQ conflict with another device (USB?).

good luck

imho 'Version 30' means it didn't find the card at all - got that after I removed the card and accidently started SFP.

cheers, Tom

yeah, most likely a card not fully seated in the slot.

thanks,

after I took the boards out and put them back in; everything worked again

must indeed be badly seated after moving .

Isn`t it crazy ....?

"Hardware version 30 detected" in germany means "no card found"

nice error code. the standard windows error code would fit better:

unknown exception on 0x00001224345E

how about this infamous translation that really existed in the German version of an old Mac application (I forgot which one, tho...)
der Stapel ist in den Haufen gelaufen
(for stack ran into heap)

cheers, Tom

astroman wrote: der Stapel ist in den Haufen gelaufen
(for stack ran into heap)

my favourite is still:

no space left on device.
(kein weltraum links auf dem geraet)

but the stack thing is very entertaining, too.

-greetings, markus-