Page 1 of 1
Posted: Fri Mar 24, 2006 4:54 am
by Laandodeman
Does anyone know if its possible to trigger de rotary speed of the B2003 with a pedal? Or is it only possible with after touch and modulation wheel?
Posted: Sat Mar 25, 2006 5:31 am
by HUROLURA
Do you intend to trigger the rotor on/off command then you have to send a midi control change 83 message on the midi channel on wich you assign the B2003.
For that purpose you would need to be able to prgram this feature form a master keyboard or midi controller. You could do that for exemple by using one of the foot switch input provided on a Behringer BCR 2000 or BCF 2000 controller.
If you intend to adjust the rotor speed you should use a foot controller instead of a foot switch (you could find this type of input on a BCF 2000) and assign it to midi control change 82 message.
Hope this could help...
Posted: Sat Mar 25, 2006 7:11 am
by Laandodeman
Yes! It works. I love this Forum. Thanks a lot Fra-59 Help!
Posted: Sat Mar 25, 2006 7:17 pm
by wayne
I use the sustain pedal on my controller keyboard for that switch
Posted: Mon Mar 27, 2006 1:19 pm
by HUROLURA
I am not at all involved in selling hardware from BEHRINGER but I think thre doing a great and cheap job towards midi Controllers.
In case you look for something more about B2003 foot controller you should have a look at the FCB 1010 from that company:
http://www.behringer.com/FCB1010/index.cfm?lang=ENG
Keep on playing music you all !!!