Page 1 of 1
Posted: Sun Sep 07, 2003 8:27 pm
by Basic Pitch
Greetings all,
Well after reading a bunch of threads in the archives it seems the standard bench mark around here seems to be masterverbs. I have a 15 DSP PowePulsar in my box which consists of the following:
- Asus A7N8X nForce2
- 512m Crucial CAS2 (normally a gig but I borred some for a 2nd PC atm).
- Athlon XP 2500+
So I decided to load them up and see what I can manage, I ended up with 10 Masterverbs before I got a "Not enough DSP Power" or something to that extent message..
Though while looking at the DSP bar it was only sitting around 70% in terms of how much the yellow bar was in considering a 1-100% ratio..
So is that any good? Just curious is all..
Cheers!
Posted: Sun Sep 07, 2003 11:48 pm
by garyb
yep,your stuff's working....
Posted: Mon Sep 08, 2003 6:27 am
by King of Snake
Hmmm, I thought a Powerpulsar would be able to do more Masterverbs than that. They don't take more than one DSP each do they?
You'd probably run into a PCI limit first.
Posted: Mon Sep 08, 2003 7:44 am
by Guest
hmm...seems a bit low...
i have a pulsar2, i get 8 masterverbs and 2 notches left on the dsp meter..
Posted: Mon Sep 08, 2003 7:45 am
by astroman
probably the Masterverb has to be careful when allocating DSP resources to prevent the device get's distributed over DSP boundaries in a way that phase fidelity suffers.
Like the math remainder in division
just a guess, tom
Posted: Mon Sep 08, 2003 7:54 am
by visilia
Can you aditionally load any other SFP devices, besides the 10 Masterverbs?
Posted: Mon Sep 08, 2003 9:22 am
by Basic Pitch
Well here is a general of whats set up in SFP, though im at work ill do my best to remember
- Mixer: 2446?
- ASIO2 16 Source
- 8x Multi S Effects inserts
- Sequencer Midi Source
- Creamware Midi A
- Analog Source
- Wave Source
- Analog Dest.
- Wave Dest.
- Asio2 Dest.
- 10x MasterVerb
To the best of my recollection that encompases the entire .pro
Cheers!
Posted: Mon Sep 08, 2003 9:52 am
by spoimala
Hmmh... I got "only" 9 and when trying to add one more, I get
"A capacity limit of your dsp cards has been reached. The specific cause is: Not enough DSP memory: cannot connect PC Master 3k delay.Tap1 and DLEXTM0.RI"
Weird. Maybe something is broken in my card? I've got this DSP memory thing before.
Posted: Mon Sep 08, 2003 10:14 am
by Basic Pitch
Spoimala,
Which card though? The 15 DSP Pulsar? Maybe Mobo PCI bandwidth has some variance in terms of how many Mverbs can be run on the card..
Who knows lol..
<font size=-1>[ This Message was edited by: Basic Pitch on 2003-09-08 11:15 ]</font>
Posted: Mon Sep 08, 2003 10:45 am
by garyb
masterverb use is limited by dsps available AND more importantly,pci bandwidth on the mobo.10 is good.the most i've seen is 12 or 13.damn,how many reverbs do you need at one time?
Posted: Mon Sep 08, 2003 11:07 am
by astroman
Spoimala, that DSP memory error is most certainly related to the processing of data, and means the specific verb / delay you use produces too much intermediate stuff.
There are only 64 kbyte on-chip cache and the message is pretty clear that this is exhausted
cheers, Tom