PlanetZ forums - scopeusers.com

the problem is in sfp 3.1

have to wait for a fix it seems, back to 3.01 where all is fine (spdif wise)

On 2002-05-10 12:38, braincell wrote:
I'm having a similar problem. I just hope the scope fusion platform fixes it.

<font size=-1>[ This Message was edited by: topaz on 2002-05-10 16:23 ]</font>

I think I have the problem in 3.01. I was hoping 3.1 would fix it.

had a similar problem. fixed it by opening a "digital wave source", connecting to "spdif dest" and then deleting the "digital wave source" again. dont know if this helps because i never tried to change the sampling rate and only used the spdif out....just a try.

<font size=-1>[ This Message was edited by: Dareinsch on 2002-05-10 15:44 ]</font>

the problem is with spdif in, not out.

thanks for your thought ;

On 2002-05-10 15:41, Dareinsch wrote:
had a similar problem. fixed it by opening a "digital wave source", connecting to "spdif dest" and then deleting the "digital wave source" again. dont know if this helps because i never tried to change the sampling rate and only used the spdif out....just a try.

<font size=-1>[ This Message was edited by: Dareinsch on 2002-05-10 15:44 ]</font>

My problem was with the spdif in as well with 3.01 so I don't think it is specific to the SFP. I'm trying to figure out the SFP now. Can't seem to get the manual because the server is too busy.

I haven't tried the new SPDIF source module yet but I think you might get it to work if you use the old one. That tricked helped me in the past with a bug in a spdif destination module.

Hi guys, thanks for the suggestions but so far...non work.

On 2002-05-10 18:40, braincell wrote:
I haven't tried the new SPDIF source module yet but I think you might get it to work if you use the old one. That tricked helped me in the past with a bug in a spdif destination module.

hehe, I had no dig problems with 3.01
and you did ? mmm things can be a biatch sometimes.. ;

On 2002-05-10 17:08, braincell wrote:
My problem was with the spdif in as well with 3.01 so I don't think it is specific to the SFP. I'm trying to figure out the SFP now. Can't seem to get the manual because the server is too busy.

no probs w/ sp/dif slaved at 44.1! you do need to have both the dest AND source mods in your project( even if dest is not connected) in your project........

yep have done all that, please read my earlier notes, nothing has changed, exact same setup/routing, only variable is 3.1, 3.01 is running fine.

there are other guys having simmalar problems so it,s a bug fix.

what is needed is someone with a 2nd pc to run audio into pulsar2 spdif, not out of pulsar back in.

On 2002-05-11 22:49, garyb wrote:
no probs w/ sp/dif slaved at 44.1! you do need to have both the dest AND source mods in your project( even if dest is not connected) in your project........

<font size=-1>[ This Message was edited by: topaz on 2002-05-12 05:58 ]</font>

Hey Topaz !
Have you seen my answer in other thread ?
http://www.planetz.com/forums/viewtopic ... tart=40&54

hi again darolek

can you explain one thing to me please ?

I have 3.01 installed alongside 3.1 sfp and 3.01 works with the exact same configaration.

again if you missed my original post, nothing has changed with my setup exept 3.1.
all is fine in 3.01 this is the last time I will say this, there are other users having the same problems, dont assume that becoz it,s working for some it works for all, bugs are like that. that is why some cant install on xp and some can(me included).

perfect example, there was a version of vst that could not save, but only for some.

On 2002-05-12 06:35, darolek wrote:
Hey Topaz !
Have you seen my answer in other thread ?
http://www.planetz.com/forums/viewtopic ... tart=40&54

On 2002-05-12 07:57, topaz wrote:
I have 3.01 installed alongside 3.1 sfp and 3.01 works with the exact same configaration.

I know, I know .....
But in SFP 3.1 many drivers (and core codes too) are reprogramed and their behaviour is <B>correct now !</B>
p.s.
Have you tried my last test ?
Good luck !

yes, I tried your test, by taking spdif out of pulsar and back in was not a problem.

this is not the issue, the issue is from another soundcard (in a 2nd pc) into pulsar spdif at 44.1

now I am off on holidays for 10 days, when I return im sure there will be a patch.

fyi I have asked some other guys to perform the test and they have the same thing.

On 2002-05-12 08:36, darolek wrote:

On 2002-05-12 07:57, topaz wrote:
I have 3.01 installed alongside 3.1 sfp and 3.01 works with the exact same configaration.

I know, I know .....
But in SFP 3.1 many drivers (and core codes too) are reprogramed and their behaviour is <B>correct now !</B>
p.s.
Have you tried my last test ?
Good luck !

<font size=-1>[ This Message was edited by: topaz on 2002-05-12 09:49 ]</font>

<font size=-1>[ This Message was edited by: topaz on 2002-05-12 09:49 ]</font>

Hi,

A nice timely reply

My S/PDIF is working fine at 44.1 looped out to my Lexicon MPX1.

Clean windows 2000 install of SFP, Pulsar II card.

cheers

mark

My spdif works fine connected from SCOPE to 03d under SFP.

hi subs ;

mmm this is a weird one, i have tried 2 soundcards from a 2nd pc into 3.1 and they are both dead @ 44.1

still awaiting a reply from ingo on this ;

regards
Matt.

On 2002-05-23 09:36, subhuman wrote:
My spdif works fine connected from SCOPE to 03d under SFP.

Got no problems. I tested it yesterday and recorded a guitar via johnson j-station. Pulsar was slave @44.1khz.
My system:
asus tusl2-c
celeron1300

read back in the thread, you will see I am using a totally different setup than you.

"what works for one won't allways work for the next"

On 2002-05-23 23:39, FreiFlug wrote:
Got no problems. I tested it yesterday and recorded a guitar via johnson j-station. Pulsar was slave @44.1khz.
My system:
asus tusl2-c
celeron1300

Sorry, my english isn´t as good as it should be. I only read your post in a very short time so i didn´get the real message.
Greetz