PlanetZ forums - scopeusers.com

Posted: **Fri May 10, 2002 4:50 am**

On 2002-05-10 05:46, topaz wrote:
as I say nothing has changed and 3.01 is still working ,

Sorry man - in 3.01 it's just a bug

Posted: **Fri May 10, 2002 4:52 am**

you mean the fact that it works in every other version of pulsar from 2.04 to 3.01 is a bug ? and now 3.1 is fixed it doesnt work,. ?

now im 100% confused. you mean it,s a bug in 3.1 sfp ?

On 2002-05-10 05:50, darolek wrote:
On 2002-05-10 05:46, topaz wrote:
as I say nothing has changed and 3.01 is still working ,
Sorry man - in 3.01 it's just a bug

[ This Message was edited by: topaz on 2002-05-10 05:53 ]

Posted: **Fri May 10, 2002 5:07 am**

Again, I am sorry Topaz. I missread it. Strange, that I get to screw up your posting repeadingly today

Immanuel

Posted: **Fri May 10, 2002 5:09 am**

hey dude dont worry ; thanks for trying to help, anyway another user has confirmed same problem...

On 2002-05-10 06:07, Immanuel wrote:
Again, I am sorry Topaz. I missread it. Strange, that I get to screw up your posting repeadingly today

Immanuel

Posted: **Fri May 10, 2002 5:17 am**

On 2002-05-10 05:52, topaz wrote:
you mean the fact that it works in every other version of pulsar from 2.04 to 3.01 is a bug ? and now 3.1 is fixed it doesnt work,. ?

Mayby

-
Ok Topaz !
Let me know one thing at least now:
Can you slave Pulsar (under SFP) to your 2nd PC via SPDIF ?

[ This Message was edited by: darolek on 2002-05-10 06:31 ]

Posted: **Fri May 10, 2002 5:44 am**

Yes I can slave to pc2(spdif) but still it only works at any samplerate but 44.1

On 2002-05-10 06:17, darolek wrote:
On 2002-05-10 05:52, topaz wrote:
you mean the fact that it works in every other version of pulsar from 2.04 to 3.01 is a bug ? and now 3.1 is fixed it doesnt work,. ?
Mayby
-
Ok Topaz !
Let me know one thing at least now:
Can you slave Pulsar (under SFP) to your 2nd PC via SPDIF ?

[ This Message was edited by: darolek on 2002-05-10 06:31 ]

Posted: **Fri May 10, 2002 6:19 am**

You must set Pulsar to slave, because this as with all digital devices must clock to the incomming signal (unless you have a signal going out of Pulsar too, in which case you can set the second PC to slave).

Posted: **Fri May 10, 2002 6:54 am**

On 2002-05-10 06:44, topaz wrote:
Yes I can slave to pc2(spdif) but still it only works at any samplerate but 44.1

What ???
This must be a problem with your 2nd PC and its getting sync at 44.1 kHz ! What's your audio card in 2nd PC ?
For test (if you have) connect something other (CD, DAT or any digital source at 44.1) to Pulsar and slave it. MUST WORKS !!!

Posted: **Fri May 10, 2002 8:32 am**

I dig that you are trying to help but once again I have 3.01 installed and the problem does not exist. the problem is in 3.1 only.

ie, if I run 3.01 there is no problem.

pulsar runs as master and all other dig gear gets it,s i/o clock from it. running pulsar as slave to pc2 would be no good anyway because then pc2 would have to on all the time. again pulsar is master .

On 2002-05-10 07:54, darolek wrote:
On 2002-05-10 06:44, topaz wrote:
Yes I can slave to pc2(spdif) but still it only works at any samplerate but 44.1
What ???
This must be a problem with your 2nd PC and its getting sync at 44.1 kHz ! What's your audio card in 2nd PC ?
For test (if you have) connect something other (CD, DAT or any digital source at 44.1) to Pulsar and slave it. MUST WORKS !!!

Posted: **Fri May 10, 2002 8:34 am**

there is no problem with my soundcard in pc2.

for the books it,s an egosys wt2496.

and yes it slaves @ 44.1 but with no sound.
just like in master mode.

On 2002-05-10 09:32, topaz wrote:

I dig that you are trying to help but once again I have 3.01 installed and the problem does not exist. the problem is in 3.1 only.

ie, if I run 3.01 there is no problem.

pulsar runs as master and all other dig gear gets it,s i/o clock from it. running pulsar as slave to pc2 would be no good anyway because then pc2 would have to on all the time. again pulsar is master .

On 2002-05-10 07:54, darolek wrote:
On 2002-05-10 06:44, topaz wrote:
Yes I can slave to pc2(spdif) but still it only works at any samplerate but 44.1
What ???
This must be a problem with your 2nd PC and its getting sync at 44.1 kHz ! What's your audio card in 2nd PC ?
For test (if you have) connect something other (CD, DAT or any digital source at 44.1) to Pulsar and slave it. MUST WORKS !!!

Posted: **Fri May 10, 2002 8:49 am**

You are using a PC, I presume and I use a Mac. But (as always) try to 'overinstall' the SFP and watch the results. Look, people here use also PCs and they have no such problem that leads me to think there is something wrong with yoiur system. Perhaps you forgot about something? I know, I know - now you become red on'ya face and say nnnnooooooo!!!! But stay cool and investigate everything from the begining. That's my not-too-wise tip. Or you'd better sleep for a while? How many hours did you sleep lately?

I'm not joking here.

[ This Message was edited by: samplaire on 2002-05-10 09:51 ]

Posted: **Fri May 10, 2002 9:04 am**

hi man, so if I have 3.01 installed and that works fine then I run 3.1 and it wont work
it,s down to my system ?

On 2002-05-10 09:49, samplaire wrote:
You are using a PC, I presume and I use a Mac. But (as always) try to 'overinstall' the SFP and watch the results. Look, people here use also PCs and they have no such problem that leads me to think there is something wrong with yoiur system. Perhaps you forgot about something? I know, I know - now you become red on'ya face and say nnnnooooooo!!!! But stay cool and investigate everything from the begining. That's my not-too-wise tip. Or you'd better sleep for a while? How many hours did you sleep lately?

I'm not joking here.

[ This Message was edited by: samplaire on 2002-05-10 09:51 ]

Posted: **Fri May 10, 2002 9:04 am**

Hey Topaz !
So look - below it's exactly your hook-up:

<IMG SRC="http://toya.net.pl/~darolek/pics/spdif.jpg">

Am I right ?

[ This Message was edited by: darolek on 2002-05-10 10:34 ]

Posted: **Fri May 10, 2002 9:08 am**

On 2002-05-10 10:04, topaz wrote:
hi man, so if I have 3.01 installed and that works fine then I run 3.1 and it wont work
it,s down to my system ?

Topaz, no, don't give up. I just wanted to suggest you overinstalling the sfp.

Posted: **Fri May 10, 2002 9:10 am**

thanks again, but yes I did that already..

I guess I just hopped that someone could at least test this.

On 2002-05-10 10:08, samplaire wrote:
On 2002-05-10 10:04, topaz wrote:
hi man, so if I have 3.01 installed and that works fine then I run 3.1 and it wont work
it,s down to my system ?
Topaz, no, don't give up. I just wanted to suggest you overinstalling the sfp.

Posted: **Fri May 10, 2002 9:36 am**

So what ?

Posted: **Fri May 10, 2002 9:42 am**

to confirm it is a bug ?

On 2002-05-10 10:36, darolek wrote:
So what ?

Posted: **Fri May 10, 2002 9:52 am**

Hmmm ... I haven't ideas !
p.s.
If you check everything (plugs, cables, settings, etc.) ones again without succes then only God can you help

[ This Message was edited by: darolek on 2002-05-10 10:53 ]

Posted: **Fri May 10, 2002 9:58 am**

yes done all that, what I need is some to test this, no more no less,.

if it works in 3.01 and not in 3.1 it must be a bug. untill someone does the test for more thats my final thought.

peace.

On 2002-05-10 10:52, darolek wrote:
Hmmm ... I haven't ideas !
p.s.
If you check everything (plugs, cables, settings, etc.) ones again without succes then only God can you help

[ This Message was edited by: darolek on 2002-05-10 10:53 ]

Posted: **Fri May 10, 2002 11:38 am**

I'm having a similar problem. I just hope the scope fusion platform fixes it.

PlanetZ forums - scopeusers.com

SFP 3.1 spdif input at 44.1k cant get a signal ?