Page 2 of 5
Re: Roland & Studio Electronics new boutique analog synth
Posted: Mon Jul 03, 2017 8:26 pm
by dante
SamT wrote:
I have a Studio Electronics ATC-X, and the problem is how to write a working sysEx.
CC controls work well not a problem, but all functions are not CC below so a sysex string is needed. All other such as Roland, Yamaha, A6, etc.
I have done work CUBASE XML editors (5), but ATCX produces the problem.
For example, Midi Quest provides a long sysex string function with a LPF / HPF filter.
F0 00 00 4D 02 00 00 00 01 15 08 00 0A 00 0F 2B
06 00 0D 25 49 4C 38 3B 35 00 00 00 2C 32 2B 54
03 31 00 1C 1B 3C 0D 1D 00 15 00 2D 7C 07 77 78
7A 00 00 02 0C 03 00 01 05 7F 0D 00 40 01 40 00
00 00 01 6A 5D 01 59 00 00 f7
BA 00 00
BA 20 03
CA 7C
In fact, I do not understand why it is about long. Normally the length is about 7-14 digits.
ATC-1 SYSEX HEADER:
BYTE 1 $ F0
BYTE 2 00
BYTE 3 00
BYTE 4 4D STUDIO ELECTRONICS I.D.
BYTE 5 02 ATC-1 UNIT I.D.
BYTE 6 nn 127 = 7F DUMP REQUEST, 0 WHEN SENDING PROGS TO ATC-1
BYTE 7 00 RESERVED
BYTE 8 00 RESERVED
BYTE 9 nn 0 = WHOLE BANK, 1 = 1 PROG AT CURRENT #, 2 = EDIT BUFFER
BYTE 10 nn MUST BE $ F7 IF THIS IS A REQUEST, OTHERWISE THIS WILL BE
THE FIRST BYT OF DATE
What are you using to send the sysex ? I have a problem sending sysex from XITE-1D to a Yamaha synth where it works from Scope PCI MIDI out. Same data.
Re: Roland & Studio Electronics new boutique analog synth
Posted: Tue Jul 04, 2017 9:04 am
by Nestor
It sounds terrific!, and the clarity of the sound is pretty unusual for analogue synths. A great achievement in my humble opinion.
Re: Roland & Studio Electronics new boutique analog synth
Posted: Tue Jul 04, 2017 12:58 pm
by dawman
BCF-2000 sends SysEx Strings.
Re: Roland & Studio Electronics new boutique analog synth
Posted: Tue Jul 11, 2017 1:18 pm
by braincell
SE-02 comes out in September. I ordered mine. I heard it's possible the hardware knobs are only 128 steps but this does not affect the sound when using external CC controllers. Worth it for that sound.
Re: Roland & Studio Electronics new boutique analog synth
Posted: Tue Jul 11, 2017 4:00 pm
by astroman
you may check out this demo for the performer:
Simon Ayton, known here for his De-Vice plugins and the ISON EQ (which is still my favorite choice in those rare cases I need an eq)
https://m.youtube.com/watch?v=qQ2mD7s8tis
cheers, Tom
Re: Roland & Studio Electronics new boutique analog synth
Posted: Tue Jul 11, 2017 6:55 pm
by dawman
Ison.
Always wondered how that plug in worked.
I never could get an answer when I tried to buy it a while back.
Anyone buying this will be happy.
I've heard the demos and thought it might not be as fat as the SE-1X because it doesn't send out multiple waveforms per Oscillator.
Doesn't have the distortion switch either.
But the sound is indistinguishable from the original.
Already bought a case for mine.
It will be controlled by the Physis K4.
I'm even sending the Hammond B3 Bass Pedal out from my HX-3 Module to the SE-02 audio input.
Been doing lots of 808 bass lines with underground rap cats.
Whole new venue for me.
They're going to love filtered Bass Pedal low end through the SE-02.
Re: Roland & Studio Electronics new boutique analog synth
Posted: Sat Jul 15, 2017 8:23 am
by braincell
.
Re: Roland & Studio Electronics new boutique analog synth
Posted: Sat Jul 15, 2017 9:31 am
by yayajohn
Re: Roland & Studio Electronics new boutique analog synth
Posted: Fri Jul 21, 2017 4:36 pm
by dawman
Re: Roland & Studio Electronics new boutique analog synth
Posted: Mon Jul 24, 2017 2:06 pm
by braincell
Re: Roland & Studio Electronics new boutique analog synth
Posted: Mon Jul 24, 2017 4:39 pm
by dawman
Fat Bastard....
Re: Roland & Studio Electronics new boutique analog synth
Posted: Mon Aug 07, 2017 11:15 am
by dawman
I just had a pair of SE-02s shipped to me.
So if they cascade well and there's no lag, it means I'll get 4 more for a fat ass 6 voice synth.
Since my Physis K4 is the controller from hell I will assume modulating parameters on main synth carrys over to the cascaded synths.
If not I'll have one to sell somebody here or wherever...
Ankyu
Re: Roland & Studio Electronics new boutique analog synth
Posted: Mon Aug 07, 2017 11:50 am
by dawman
Make that SE-02 mono signal FAT with BCM + Sample Delay.
- SE-02.jpg (150.33 KiB) Viewed 13821 times
Re: Roland & Studio Electronics new boutique analog synth
Posted: Tue Aug 08, 2017 4:16 am
by yayajohn
awesome! Haven't seen any videos of anyone cascading yet. Hope you have time to post some stuff cause I'd really like to hear that.
Re: Roland & Studio Electronics new boutique analog synth
Posted: Tue Aug 08, 2017 7:14 am
by dawman
I can record again....
I have time even though I'm moving back to Nevada.
The H97 works better than my Z97s.
Learning from at0m still that less is more.
My family needs me, I miss them.
Especially my mother n Law.
She's in constant fear of being deported...
She lives at 4155 West Pecos
Las Vegas, NV.
89103
Re: Roland & Studio Electronics new boutique analog synth
Posted: Tue Aug 08, 2017 7:57 am
by yayajohn
Aww too bad you're moving back. You're going to miss us here in TN
Re: Roland & Studio Electronics new boutique analog synth
Posted: Tue Aug 08, 2017 8:07 am
by dawman
I've had enough of these Tributes.
Going to be doing a DJ freestyle rap gig, and maybe some other offensive music.
I'll miss the tornados floods and trees.
There's just not enough night life for me in the Midwest/south.
Dragging my mobile nightclub around was fun though.
Time for a change.
I will never leave PlanetZ though.....
Re: Roland & Studio Electronics new boutique analog synth
Posted: Wed Aug 09, 2017 1:03 pm
by dawman
Fat bastards for sure.
Excellent discrete audio quality.
Fits in the Roland Boutique bag perfectly.
Sits under my LCD/iLok stand too.
Re: Roland & Studio Electronics new boutique analog synth
Posted: Wed Aug 09, 2017 3:40 pm
by Nestor
Awesome! Awesome! Awesome!
Re: Roland & Studio Electronics new boutique analog synth
Posted: Thu Aug 10, 2017 12:09 am
by Marco
Dawman how did you get this Roland 01? Are you a Betatest team member or is this model already aviable in the USA stores.