midi all notes off

An area for people to discuss Scope related problems, issues, etc.

Moderators: valis, garyb

Post Reply
Joey
Posts: 110
Joined: Tue Jan 05, 2010 12:21 am

midi all notes off

Post by Joey »

Is there an easy way to send an all notes off midi command to a synthesizer?
Sometimes notes can "hang" when a note off is missed (for whatever reason) and I cannot find a way to solve this.
fra77x2
Posts: 411
Joined: Sun May 03, 2015 3:23 pm

Re: midi all notes off

Post by fra77x2 »

in your daw you should find the key command that sends an "all notes off" message and use it. inside scope i am not sure if there is something similar, you can make one with the sdk but it is not worth it because it is a standard command in the daws. in your daw most probably there should be a way to configure an all notes off message on transport stop also.
Joey
Posts: 110
Joined: Tue Jan 05, 2010 12:21 am

Re: midi all notes off

Post by Joey »

Thank you.
I am not really using a daw, I am using VCV rack to control the synths. And VCV doesn't have an all notes off command, yet.
So I was hoping I could fix this inside Scope.
User avatar
valis
Posts: 7306
Joined: Sun Sep 23, 2001 4:00 pm
Location: West Coast USA
Contact:

Re: midi all notes off

Post by valis »

Sounds like a feature for the midi modules in VCV. Some midi interfaces have a button for this, ad an active sensing device can be unplugged/replugged to achieve this.
fra77x2
Posts: 411
Joined: Sun May 03, 2015 3:23 pm

Re: midi all notes off

Post by fra77x2 »

i don't remember for scope. if your sequencer in vcv rack has a reset pin perhaps it sends note offs. another way is programatically. make a small app that uses one scope midi source. send there your all notes off messages and merge it with your other scope midi source that comes from vcv rack. An arduino would be very helpful if you like to add a physical button or something like that.
Joey
Posts: 110
Joined: Tue Jan 05, 2010 12:21 am

Re: midi all notes off

Post by Joey »

I just found out the midi module in VCV has a right click "panic" option. So that will probably do the trick.
fra77x2
Posts: 411
Joined: Sun May 03, 2015 3:23 pm

Re: midi all notes off

Post by fra77x2 »

yes this should work.
Berny Shoes
Posts: 77
Joined: Fri Dec 21, 2018 3:22 am

Re: midi all notes off

Post by Berny Shoes »

From forum search for Midi Panic Button
Can’t guarantee these are what you were after

Mausmuso
viewtopic.php?p=323578&hilit=Midi+panic+button#p323578


Wolf Audio
viewtopic.php?p=219784&hilit=Midi+panic+button#p219784
User avatar
Spielraum
Posts: 696
Joined: Fri Apr 18, 2014 1:11 pm
Location: Raumschiff Erde

Re: midi all notes off

Post by Spielraum »

You can also find midi panic button here.
simply integrate at the end of the signal chain!
+ Midi delay, if required

SR-Dly8 | Audio+Midi Helper
https://forums.scopeusers.com/viewtopic.php?t=36831

MidiDelay |MODULES #Spielraum
https://forums.scopeusers.com/viewtopic.php?p=349037#p349037
|̲̅̅●̲̅̅|̲̅̅=̲̅̅|̲̅̅●̲̅̅] Lange Welle ~ Mittelwelle ~ Kurze Welle ~ Ultra Kurze Welle
Scope Sandbox soundcloud ~ youtube ~ bc modular-guide° ~ modules-SR
User avatar
spacef
Posts: 3234
Joined: Sun Jun 17, 2001 4:00 pm
Contact:

Re: midi all notes off

Post by spacef »

for a single device, just change the midi channel, and change back to the orginal value. it cuts hung notes on that device. It's fast to do when the device has a click n drag midi channel selector, because it's just a "click-n-drag up and down" movement.

Could be an idea for a 16 channel midi device patch bay with a increase/decrease button linked to all channels (1 button to rule them all, lol), that will result in a all-notes-off, just like a panic button, but in fact it's just midi-channel increase+decrease macro.
plug-ins for scope
SpaceF website
SC website
Post Reply