DIY 8 core loom some help needed

A place to talk about whatever Scope music/gear related stuff you want.

Moderators: valis, garyb

Post Reply
irrelevance

DIY 8 core loom some help needed

Post by irrelevance »

I'm in need of a few 8 way looms to tidy up the studio and minimise cross talk but most commercial looms are way over priced retailing at over £50 for 3m! It's even worse when you consider that these are not balanced and the connectors are moulded plastic...blerrgh

http://www.dv247.com/cables/dv-studio-c ... oom--28273


Mono looms are cheaper and probably what I need as my requirement is just synth output

I'm sure I could probably make my own with decent connectors for less but I can't find 8 core individually screened cable anywhere at present but found this 4 core here:

http://www.maplin.co.uk/module.aspx?Tab ... &U=Strat15


any suggestions where 8 core can be found preferably bought by the metre
Micha
Posts: 471
Joined: Tue May 08, 2001 4:00 pm
Location: Berlin
Contact:

Re: DIY 8 core loom some help needed

Post by Micha »

maybe you have a look at telephone cables 8 cores...
netguyjoel
Posts: 1228
Joined: Sat Apr 11, 2009 9:34 am
Location: The Land of Cheese, Beer & Fat Chicks

Re: DIY 8 core loom some help needed

Post by netguyjoel »

IMO...I made my own cables...bought some bulk cable (good quality shielded cable) mu own 1/4" and XLR ends...soldered them myself. You can achieve the exact length you require...in other words...you might need all 8 to be exactly the same length, and as well as the overall length, so as not to have a pile of spaghetti on the studio floor. :wink:
cheerz
Joel
irrelevance

Re: DIY 8 core loom some help needed

Post by irrelevance »

Micha wrote:maybe you have a look at telephone cables 8 cores...
thx Micha but I wouldn't have said telephone cable was fit for purpose. It's single strand (not very resilient) and not individually shielded.

netguyjoel wrote:IMO...I made my own cables...bought some bulk cable (good quality shielded cable) mu own 1/4" and XLR ends...soldered them myself. You can achieve the exact length you require...in other words...you might need all 8 to be exactly the same length, and as well as the overall length, so as not to have a pile of spaghetti on the studio floor. :wink:
cheerz
Any links to suppliers?
netguyjoel
Posts: 1228
Joined: Sat Apr 11, 2009 9:34 am
Location: The Land of Cheese, Beer & Fat Chicks

Re: DIY 8 core loom some help needed

Post by netguyjoel »

Joel
irrelevance

Re: DIY 8 core loom some help needed

Post by irrelevance »

Ok I found this one here coming in at £11.82 for 3M

http://uk.farnell.com/jsp/search/produc ... sku=798459

mono jacks can be had for around £1.50 so £12 for 8

and then maybe need some sleeving to tidy up

maybe £5

So £30 for 8 core loom metal mono connectors

Dolphin does this 3M 8 core stereo loom

http://www.dolphinmusic.co.uk/product/5 ... -loom.html

£19.57 + £6.99 shipping = £26.56
Post Reply