So I am trying to use more mono SFX in my tracks.
Problem is most of my sources are already stereo!! I can mix the stereo signal into mono, sure. However I am thinking this will create some sort of phase gap in the stereo image.....
Maybe the trick is to only use mono effects on seperate channels of the stereo signal, or start with mono to begin with ?
Am I correct that mixing stuff together like this will create some phase weirdness ? Sure, sure, if it sounds good who cares ?
Anyhoo, thoughts are welcome.
using mono!
if your signal is mono, there's no need to make it stereo.
If the signal is dual mono you can take one side.
If it's real stereo, I wouldn't change that
In case you take one side of a dual-mono signal, you won't suffer from a lower signal-to-noise rate, to name something, as you're in digital domain.
If the signal is dual mono you can take one side.
If it's real stereo, I wouldn't change that
In case you take one side of a dual-mono signal, you won't suffer from a lower signal-to-noise rate, to name something, as you're in digital domain.
- FrancisHarmany
- Posts: 1078
- Joined: Sun Jun 02, 2002 4:00 pm
- Location: Haarmania