Problem with meter mode scope V7

A place to talk about whatever Scope music/gear related stuff you want.

Moderators: valis, garyb

Post Reply
Ciairo
Posts: 17
Joined: Sun Dec 11, 2016 11:40 am

Problem with meter mode scope V7

Post by Ciairo »

Goodmorning everyone! My name is Claudio and I have a problem with the scope mode of the scope V7 software. Where are the Pre fader and Post Fader buttons for the scope v7 meter mode? In the meter mode drop-down menu on the mixer master does not appear. There are only Post Gain and Post Inserts. My problem is that when I send a signal on a scope v7 mixer track (for example a pink noise from the control room), when I lower or reset the fader, the meter of that track still detects the signal. The problem occurs on all V7 scope mixers. Can someone help me solve the problem? Thank you!! Claudio.
User avatar
garyb
Moderator
Posts: 23248
Joined: Sun Apr 15, 2001 4:00 pm
Location: ghetto by the sea

Re: Problem with meter mode scope V7

Post by garyb »

with an XITE?
it has been like that since the beginning, i think.
JoPo
Posts: 2306
Joined: Wed Jun 05, 2002 4:00 pm
Location: VRRAAaaooOôOooommmh
Contact:

Re: Problem with meter mode scope V7

Post by JoPo »

I remember that the other meter mode disapeared on Xite version of Scope. Indded, I just checked in my PCI's and they are all there but not on Xite. Don't know why, it's a pity, they are useful !
> > > > > > > > > > > > --- Musica --> here ! ---< < < < < < < < < < < <
Ciairo
Posts: 17
Joined: Sun Dec 11, 2016 11:40 am

Re: Problem with meter mode scope V7

Post by Ciairo »

Yes, it is very useful for me to set the meter mode in post-fader and the pre-fader in xite. I hope the V7 scope programmers solve the problem with the next upgrade!!
Post Reply