KrOn - CV/DSP modulator

General discussion for SpaceF Devices

Moderators: valis, spacef

User avatar
spacef
Posts: 2845
Joined: Sun Jun 17, 2001 4:00 pm
Contact:

Re: KrOn - CV/DSP modulator

Post by spacef »

January 31st 2019

Added KrOn V - which looks exactly the same as KrOn - but without the 2 MS20 cv, only DSP and V/Oct (eurorack and modern synths, even Korg's new series). so it saves a lot of connections. presets are compatible between KrOn and KrOn V (at least from KrOn to KrOn V, and it should be also be ok from V to KrOn).

Various corrections/improvments/graphics in KrOn and CV synths.

Available with "KrOn max Pack" and "KrOn "not max".
https://spacef-devices.com/kron/kron-updates/

Have fun
plug-ins for scope
SpaceF website
SC website

User avatar
yayajohn
Posts: 1407
Joined: Thu Mar 01, 2007 5:01 pm
Location: Everywhere....Nowhere

Re: KrOn - CV/DSP modulator

Post by yayajohn »

Great! Thanks can't wait to try it out.

User avatar
spacef
Posts: 2845
Joined: Sun Jun 17, 2001 4:00 pm
Contact:

Re: KrOn - CV/DSP modulator

Post by spacef »

Hi !

There are *.exe files available for KrOn and MAxPack, for xite and scope pci.
They are on SonciCore's FTP.
Have fun.
Mehdi
plug-ins for scope
SpaceF website
SC website


User avatar
spacef
Posts: 2845
Joined: Sun Jun 17, 2001 4:00 pm
Contact:

Re: KrOn - CV/DSP modulator

Post by spacef »

Magma CV has been corrected (VCA "non-drone" mode was not working, now corrected).
https://spacef-devices.com/news/magma-cv/
plug-ins for scope
SpaceF website
SC website

User avatar
Spielraum
Posts: 512
Joined: Fri Apr 18, 2014 1:11 pm
Location: Raumschiff Erde

Re: Re: Kron - CV modulator

Post by Spielraum »

spacef wrote:
Sat Nov 03, 2018 12:14 pm
Hi Ron,

I am very ignorant with Modular and BCM. I should make patches in fact...
Look at the pic below. It is not good like this ? You can control osc, filters etc.
Isn't it better to have KrOn outside? for presets? (i think modular and preset is not the best? last time i tried was in 2003 i think :-) )

KrOn to Modular Patch:
Kron-Modular.jpg
we will see...
the ingenious SC preset structure works very well separately in the modular shell (M2g3,M3,M4,BCM) for each module if you want!
In 2020 I will present some practical modules that use their own preset management
with MIDI or ASYNC PROGRAM CHANGE in the same modular container.
automation with mutual preset switching is no longer a problem!
not new, but not used in development ~ why? i don`t know...

Ps .:
Stay tuned for a Modular Shell Spielraum Edition 2020

8)
|̲̅̅●̲̅̅|̲̅̅=̲̅̅|̲̅̅●̲̅̅] Lange Welle ~ Mittelwelle ~ Kurze Welle ~ Ultra Kurze Welle

User avatar
spacef
Posts: 2845
Joined: Sun Jun 17, 2001 4:00 pm
Contact:

Re: KrOn - CV/DSP modulator

Post by spacef »

Makes me think I need to re-post my modular insert hosts.
They all had presets but they did not work great with insert slots. Worked fine with the parameters of the module itself though.

KrOn is great to have externally because you can save presets (or not) and use them with different things, and one can connect a modular to it too. I guess it could also be ported as a modular module but not sure this would be very useable (KrOn is big :-) )
plug-ins for scope
SpaceF website
SC website

User avatar
Spielraum
Posts: 512
Joined: Fri Apr 18, 2014 1:11 pm
Location: Raumschiff Erde

Re: KrOn - CV/DSP modulator

Post by Spielraum »

YES drop of bitterness, module "insert slot" parameters will unfortunately bind to the shell preset structure, you are right! otherwise the concept behaves as in the independent device. i'll keep playing around with what's going on...
|̲̅̅●̲̅̅|̲̅̅=̲̅̅|̲̅̅●̲̅̅] Lange Welle ~ Mittelwelle ~ Kurze Welle ~ Ultra Kurze Welle

User avatar
spacef
Posts: 2845
Joined: Sun Jun 17, 2001 4:00 pm
Contact:

Re: KrOn - CV/DSP modulator

Post by spacef »

UPDATE TIME (FINAL HOPEFULLY)
==========================================


KrON:
=====


-- Corrects all overlapping pop-up menus (pitch 1 & 2 selectors) that could go behind pots and menus of the bottom sections. Many of those were unoticed by me because of diffrerence between SDK, Scope 5, Scope 7 etc. Now fixed !!
-- Graphics: BPM section graphics corrected (KrOnSync button was hiding end of text, no text for external midi clock, now redesigned)
-- T1 & T2 added as modulators in the P1/P2 mixers but only in the third selector. Because not having them there was totally against KrOn's philosophy (especially when *not* using P1/P2 for quantized Pitch). Now corrected.
-- Dual KrOnSync Output: for better project organization, the KrOnSYnc output (Bpm Output Pad) is placed at the top and at the bottom of the device. It is the same pad, just allows to have better looking routing window.
-- KrOn loads with settings that make it easier to hear differences in various "play modes" (check the leds to see what notes it plays in the different modes ==> it won't do anything if you have the same notes repeating on all 4-steps sections, it is much more obvious on complex 32 step sequences: that way you should hear many differences).
--- Litterature: some tooltips were re-written (bpm section).

JunZ
====

-- Added LFO Sync, BPM, KrOnSync
-- Internal BPM display disappears when KrOn Sync is "On". KronSync button tells you to check tempo on KrOn (it is unfotunately not possible to display the KrOn's tempo on external devices, so you have to check on KrOn if you forget what is your tempo-and if you use KrOnSync you are using KrOn as the master tempo for all connected devices).
-- Changed color of tyhe audio input insert slot to grey for better visibility
-- Audio Input send to Ring is now taken Pre-Insert. This sounds better and allows to have the audio as Ring modulator while audio in level is at 0.
-- Drone mode button display should be corrected but presets might have to be resaved for correction to happen.
-- Better tooltips (audio in ring, KrOnSync section).

Magma
======

--- KrOnSync Inputs at the top and bottom of the device for better looking routing window.
--- Internal BPM display disappears when KrOn Sync is "On". KronSync button tells you to check tempo on KrOn.

Spirit
======

--- KrOnSync Inputs at the top and bottom of the device for better looking routing window.
--- Internal BPM display disappears when KrOn Sync is "On". KronSync button tells you to check tempo on KrOn.


Pictures below:
The dual in/out bpm pads work like all i/o of scope:
- it is possible to connect both outputs to different bpm inputs of different devices.
- it is not possible to connect 2 Bpm inputs at the same time. The device will not let you connect the second pad once one of them is connected ("cannot route / incompatible pads" error message = perfectly normal/logical behaviour)

- Error Message with nothing connected: it is normal that KrOn displays a "division by zero " message when you "Kron-Sync it" with no master Kron BPM plugged into the Bpm inputs. when nothing is plugged in, KrOn sees BPM=0 and cannot compute the actual tempo (0 in = 0 out = impossible tempo).


Many thanks to beta testers who helped a lot in making this update quickly available and as complete as possible...
Attachments
KRON-DUAL-SYNC-OUT.jpg
KRON-DUAL-SYNC-OUT.jpg (7.96 KiB) Viewed 867 times
MAGMA-DDUAL-INS.jpg
MAGMA-DDUAL-INS.jpg (9.04 KiB) Viewed 867 times
plug-ins for scope
SpaceF website
SC website

Post Reply