very slow .dev loading on Xite

The Sonic Core XITE hardware platform for Scope

Moderators: valis, garyb

Post Reply
nebelfuerst
Posts: 479
Joined: Tue Jun 23, 2009 10:55 am

very slow .dev loading on Xite

Post by nebelfuerst »

I'm messing around with my XITE.
On one testproject the first devices took a few seconds to load.
Now there are some synths, mixers and effects in that project, but DSP is still below 50%.
When loading/inserting simple devices as masterverb oder SC-RMX160, the insertion takes minutes !
I can see the progressbar of loading advancing very very slow.
Sometimes I just kill the software after 10minutes, when nothing happens.

Unfortunately I cannot do anything to interact with scope in that situation. ( the music runs perfectly while loading)

Loading the complete project takes less then a minute.
If I insert the same device directly after project loading, it takes about 2min. Why so slow ?


What can I do to fix this ?

My setup:
A16 with Z-link on Xite, with PCIE card under Win7
\\\ *** l 0 v e | X I T E *** ///
djmicron
Posts: 1181
Joined: Wed Jul 23, 2003 4:00 pm
Location: Milano

Re: very slow .dev loading on Xite

Post by djmicron »

Hi if you can share the project, we can test it and try to reproduce your issue.
nebelfuerst
Posts: 479
Joined: Tue Jun 23, 2009 10:55 am

Re: very slow .dev loading on Xite

Post by nebelfuerst »

I just tried to reproduce the effect, but it currently doesn't show up.
The effect occured, when I was using wave_out with vlc and using a Webbrowser in parallel.
I also switched Xite on before the A16.
I know, this sounds mystical, but there is an unknown component to make my observation reproduceable.
Stay tuned ;-)
\\\ *** l 0 v e | X I T E *** ///
Post Reply