B2003 and rotary

Discuss the Creamware Noah

Moderators: valis, garyb

Post Reply
Laandodeman
Posts: 15
Joined: Mon Sep 26, 2005 4:00 pm

Post by Laandodeman »

Does anyone know if its possible to trigger de rotary speed of the B2003 with a pedal? Or is it only possible with after touch and modulation wheel?
User avatar
HUROLURA
Posts: 1311
Joined: Tue Feb 21, 2006 4:00 pm
Location: FRANCE
Contact:

Post by HUROLURA »

Do you intend to trigger the rotor on/off command then you have to send a midi control change 83 message on the midi channel on wich you assign the B2003.
For that purpose you would need to be able to prgram this feature form a master keyboard or midi controller. You could do that for exemple by using one of the foot switch input provided on a Behringer BCR 2000 or BCF 2000 controller.

If you intend to adjust the rotor speed you should use a foot controller instead of a foot switch (you could find this type of input on a BCF 2000) and assign it to midi control change 82 message.

Hope this could help...
Laandodeman
Posts: 15
Joined: Mon Sep 26, 2005 4:00 pm

Post by Laandodeman »

Yes! It works. I love this Forum. Thanks a lot Fra-59 Help!
User avatar
wayne
Posts: 2375
Joined: Sun Dec 23, 2001 4:00 pm
Location: Australia

Post by wayne »

I use the sustain pedal on my controller keyboard for that switch :smile:
User avatar
HUROLURA
Posts: 1311
Joined: Tue Feb 21, 2006 4:00 pm
Location: FRANCE
Contact:

Post by HUROLURA »

I am not at all involved in selling hardware from BEHRINGER but I think thre doing a great and cheap job towards midi Controllers.

In case you look for something more about B2003 foot controller you should have a look at the FCB 1010 from that company:

http://www.behringer.com/FCB1010/index.cfm?lang=ENG

Keep on playing music you all !!!
Post Reply