MIDI Host With Master Effects Module Inserted

Tips and advice for getting the most from Scope. No questions here please.

Moderators: valis, garyb

Post Reply
dawman
Posts: 14368
Joined: Sun Jul 24, 2005 4:00 pm
Location: PROJECT WINDOW

MIDI Host With Master Effects Module Inserted

Post by dawman »

It only took 10 years of using Scope but here is the way to bring the Phaser of Death in and out of Scope.

Load up the module below.
Drag a Master Effects Module from the Tools Folder into it's inset slot.
Connect wherever you want, but I use an AUX from a mixer so every channel has the Phaser of Death.

Tried Scope Phasers, too much dry signal in the sound, tried various pedals, Phaser 90, Small Stone, TC Helix,
but Walrus Audio is that old fat bastard sound from the 70s as it's an OTA.

I got 3 presets.
1) Phaser + Filter
2) Dual 10 Stage
3) Phaser w/ pitch shift

Then when I want the effect a fader attached to the Master Effects Output knob goes from clean to full tilt.
Any Channel with AUX 2 turned up gets juiced...

This is old school but so many EDM mixes I like that use Phasers could get a great jolt from this.
I also route it through the Radial Space Heater with 80% drive so it's a fat son of a bitch.

The trick and Tip is using the Master Effects Module volume knob inside of a MIDI Host.
MASTER FX MIDI HOST.jpg
MASTER FX MIDI HOST.jpg (263.8 KiB) Viewed 5653 times
IMG_1036.JPG
IMG_1036.JPG (229.13 KiB) Viewed 5653 times
Midi Host.zip
(58.27 KiB) Downloaded 308 times
User avatar
Marco
Posts: 1260
Joined: Thu Oct 10, 2013 4:27 pm
Location: Ödenwald

Re: MIDI Host With Master Effects Module Inserted

Post by Marco »

Great outboard, I love to use outboard because scope is in real time.
:wink: out and about for music production. Are you still configguring your Studio :lol: music first!
dawman
Posts: 14368
Joined: Sun Jul 24, 2005 4:00 pm
Location: PROJECT WINDOW

Re: MIDI Host With Master Effects Module Inserted

Post by dawman »

I find a healthy mix of dNa plug ins and real hardware gives me the best results.
Post Reply