Free Compressor Black Alpha corrected

[Peter4724]

A big mistake.
The MIX Potti had no function.
This is the corrected version.

Hi

Another sounding Compressor. Placed two "Bands" on the side and middle signal.

Have fun

r
Peter

Black Alpha.PNG (187.2 KiB) Viewed 6624 times

[JoPo]

Fan-ta-s-ti-K !!

[Yogimeister]

Thank you !

[ehasting]

Bang on! Great sounding compressor... and also very nice looking!

It really helps giving that "thump" sound to the bottom, and sound cool when driven hard!

Thanks

[Yogimeister]

Still exploring it ...

One thing though ... When i tweak the m/s to the left side (mono) i seem to be getting the output panned left ....

(Does this enable processing only on the left channel ?(??) )

[Peter4724]

Still exploring it ...

One thing though ... When i tweak the m/s to the left side (mono) i seem to be getting the output panned left ....

(Does this enable processing only on the left channel ?(??) )

I can not find this problem but have another error noticed.
The MIX Potti had no function.
I corrected it.

[ehasting]

Thanks regarding the mix pot.. not that i minded it when i used it, since i wanted all on.. but mix pot gives more options!

thanks.

[Yogimeister]

I can not find this problem but have another error noticed.
The MIX Potti had no function.
I corrected it.

Hehe thanx ... I didnt get to the stage of mixing it "out" yet ... Am still learning how to use it in 100% mix

I will reDL and see if I can display the behavior I encountered ....


But basically - what does the m/s knob do ?
(Feeds m or s into the "sidechain" ? Or m/s control of the signal (both in and out ?)

[Peter4724]

But basically - what does the m/s knob do ?
(Feeds m or s into the "sidechain" ? Or m/s control of the signal (both in and out ?)

The M / S mode knob turned to the left reduces the current threshold value from the side signal.
Right turned the threshold of the middle signal is reduced.

[Yogimeister]

Thank you

Does the compressor work on both bands seperately - or is there one single compression (attenuation) stage that will works on both bands (but reacts to a function of two different attenuation signal feeds?

(I couldnt understand if thats what you meant by two "bands" on m/s - or if u were referring to the bass band and the "else" band

[Peter4724]

Thank you

Does the compressor work on both bands seperately - or is there one single compression (attenuation) stage that will works on both bands (but reacts to a function of two different attenuation signal feeds?

(I couldnt understand if thats what you meant by two "bands" on m/s - or if u were referring to the bass band and the "else" band

Here's the signal flow.
Signal input - high / low pass filter - 2-band frequency separation - M/S separation for each frequency band -
a compressor on the high and a compressor on the low for each M/S Signal.........out.

[Yogimeister]

Cool ... Thanks!

(If this is the case - may i suggest a seperate m/s control knob for high & low bands - to be able to tighten the mono image on low and expand the highs a bit