MOVEQ manual...
MOVEQ manual...
Hi...
Everybody, in the MOVEQ threads is speaking about its manual... But I can't find it ! Where is it ? It is really a greatissime device ! And I'm sure I'll use it better with some explanations..
Thanks...
Everybody, in the MOVEQ threads is speaking about its manual... But I can't find it ! Where is it ? It is really a greatissime device ! And I'm sure I'll use it better with some explanations..
Thanks...
Re: MOVEQ manual...
Still amazing device ! With a true manual !! More thant excellent !
Re: MOVEQ manual...
Just one information I need... I'd like to know the difference between moveq+ & moveq+cut... I cannot find any.
Thanks !
Thanks !
Re: MOVEQ manual...
JoPo Mon Frere,
You'll notice on the lower right Main/Sat/Monitor selections, that there is a version w/ no monitoring of the affected signals. Why someone would want that could be a lack of DSP.
You'll notice on the lower right Main/Sat/Monitor selections, that there is a version w/ no monitoring of the affected signals. Why someone would want that could be a lack of DSP.
Re: MOVEQ manual...
Ah ! Yes ! Merci, Jimmy..
Re: MOVEQ manual...
Does anyone here use this marvellous Dynamic EQ.
If so, are you using the EnvFollower in the Insert....
I cannot get the surface to show up when I load into the project, or drag it into the Insert of the MOVeq-8.
I can use Mehdi's LFO-EF device as an insert, but I wanted to use the EF Module designed to be used with the Device.
Any help would be appreciated.
Ankyu.
If so, are you using the EnvFollower in the Insert....
I cannot get the surface to show up when I load into the project, or drag it into the Insert of the MOVeq-8.
I can use Mehdi's LFO-EF device as an insert, but I wanted to use the EF Module designed to be used with the Device.
Any help would be appreciated.
Ankyu.
Re: MOVEQ manual...
Does MOVEQ work on scope 64bit?
Re: MOVEQ manual...
All plugins work on any Plattform be it 32bit-64bit sfp 4-4.5.5.5.1.Streber wrote:Does MOVEQ work on scope 64bit?
Re: MOVEQ manual...
Yes it works but I think everyone just loved the GUI and never really understood its possibilities, or really dug into the device.
MCCY's Mubaco is a kick ass multi band/ sidechained comp that rocks really nice, even in x64.
But I never hear of anyone using that either.
I am trying to use the MovEQ on sampled content to add some motion to the sound.
But the EF that MCCY made cannot have its surface shown, so I made a Modular version.
I've been really busy with other things and am out the door right now to go to CES.
But if anyone has ever used this, or is using it, I would love to compare notes with them.
So far I have the frequency controlled Gate working, the regular gate, MIDI kick, and the LFO.
Everything except the EF ( envelope follower ).
Ankyu......
MCCY's Mubaco is a kick ass multi band/ sidechained comp that rocks really nice, even in x64.
But I never hear of anyone using that either.
I am trying to use the MovEQ on sampled content to add some motion to the sound.
But the EF that MCCY made cannot have its surface shown, so I made a Modular version.
I've been really busy with other things and am out the door right now to go to CES.
But if anyone has ever used this, or is using it, I would love to compare notes with them.
So far I have the frequency controlled Gate working, the regular gate, MIDI kick, and the LFO.
Everything except the EF ( envelope follower ).
Ankyu......
Re: MOVEQ manual...
Oh Did you get my email reply with the three versions of EF?! It worked here and at least one should do its work...
If not, we will find a way to get it working...
Martin
If not, we will find a way to get it working...
Martin
Re: MOVEQ manual...
Negative Brotha' Man Martin.
Could you please resend and I will immediately verify.
Thanks So Much For This Gem.
It so far only needs the EF modules.
This is an incredible way to treat external audio and especially Kontakt/ASIO instruments.
I can load as many of these as I want too. Seems like you got lucky with the design.
So many plugs from 3rd party guys seem to need a small sys. or tweak to operate in x64.
Could you please resend and I will immediately verify.
Thanks So Much For This Gem.
It so far only needs the EF modules.
This is an incredible way to treat external audio and especially Kontakt/ASIO instruments.
I can load as many of these as I want too. Seems like you got lucky with the design.
So many plugs from 3rd party guys seem to need a small sys. or tweak to operate in x64.
Re: MOVEQ manual...
oh, sorry, somehow the mail got lost. here are those three ef. one should work at least...
martin
martin
- Attachments
-
- ef.zip
- (182.76 KiB) Downloaded 282 times
Re: MOVEQ manual...
Thanks so much chief.
8 downloads..........Good some new partners to share with maybe.
Hey speak out.............don't be ashamed you couldn't figure out what EF was.
Took me 4 years.............
Chumps....
8 downloads..........Good some new partners to share with maybe.
Hey speak out.............don't be ashamed you couldn't figure out what EF was.
Took me 4 years.............
Chumps....
Re: MOVEQ manual...
On the XITE-1 x64 RC 5.2, the only module that allows it's surface shown is the EnvFol.mdl.
EF and EnvFol2.mdl won't allow their surface shown.
The EnvFol does work though.
Thanks so much.
I ahve a really nice String instrument where I layer instrument banks and this tool is perfect.
You Have A good New Year, and thanks for setting the baby down.
EF and EnvFol2.mdl won't allow their surface shown.
The EnvFol does work though.
Thanks so much.
I ahve a really nice String instrument where I layer instrument banks and this tool is perfect.
You Have A good New Year, and thanks for setting the baby down.